Close
(0) Кошница
Няма продукти в кошницата.
Категории
    Filters
    Настройки
    Търси
    Производител: Form Futura

    ABSpro - White

    68,02 лв.
    ABSpro is a professional high-strength ABS (Acrylonitrile Butadiene Styrene) based 3D printer filament – which has been reinforced with a mixture of Styrene Maleic Anhydride (SMA) and PolyCarbonate (PC) – resulting in an incredibly strong and even more impact resistant filament. ABSpro is extremely strong, has an high gloss and is extremely suitable for printing mechanical parts with high precision and fine detail and has exceptional endurance properties.
    *
    *
    Наличност: Please select required attribute(s)
    ABSpro is a professional high-strength ABS (Acrylonitrile Butadiene Styrene) based 3D printer filament – which has been reinforced with a mixture of Styrene Maleic Anhydride (SMA) and PolyCarbonate (PC) – resulting in an incredibly strong and even more impact resistant filament. ABSpro is extremely strong, has an high gloss and is extremely suitable for printing mechanical parts with high precision and fine detail and has exceptional endurance properties.

     

    Unique features

    • Extremely strong and impact resistant

    • Extremely high printing precision

    • High gloss

    • Good chemical resistance

     

    General printing guidelines *

    Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 106%
    Print temp: ± 245 - 275° C * Print speed: Medium Retraction: Yes ± 5mm
    Heat bed: ± 110 - 120° C * Fan speed: 0-25% Experience level: Expert

    *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

    *) Because of the relative high percentage of added PolyCarbonate, ABSpro has a tendency to warp and therefore it is recommended to use a temperature-controlled build chamber and to prepare your heat bed with DimaFix fixative spray when 3D printing large(r) scaled objects with ABSpro.

     

    Filament length

    ρ: 1.05 g/cc 50 gr coil 0.5 Kg spool      
    Ø 1.75mm ± 19.8m ± 198m      
    Ø 2.85mm ± 7.5m ± 75m      

     

    Product export information

    HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

     

    Compliance *

    This filament is compliant to below listed directives and regulations.

    • RoHS directive 2011/65/EC

    • REACH directive 1907/2006/EC 

    *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

     

    Продуктови спецификации
    Filament Material ABS
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Тегло 500 g
    Nozzle size ≥ 0.15mm
    Print temp ± 245 - 275° C *
    Heat bed ± 110 - 120° C *
    Layer height ≥ 0.1mm
    Print speed Medium
    Fan speed 0-25%
    Flow rate ± 106%
    Retraction Yes ± 5 mm
    Experience level Expert
    Напиши отзив
    • Може да оставите отзив за продукт само след като го закупите.
    • Само регистрирани потребители могат да пишат отзиви
    *
    *
    • Лошо
    • Отлично
    *
    *
    *
    ABSpro is a professional high-strength ABS (Acrylonitrile Butadiene Styrene) based 3D printer filament – which has been reinforced with a mixture of Styrene Maleic Anhydride (SMA) and PolyCarbonate (PC) – resulting in an incredibly strong and even more impact resistant filament. ABSpro is extremely strong, has an high gloss and is extremely suitable for printing mechanical parts with high precision and fine detail and has exceptional endurance properties.

     

    Unique features

    • Extremely strong and impact resistant

    • Extremely high printing precision

    • High gloss

    • Good chemical resistance

     

    General printing guidelines *

    Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 106%
    Print temp: ± 245 - 275° C * Print speed: Medium Retraction: Yes ± 5mm
    Heat bed: ± 110 - 120° C * Fan speed: 0-25% Experience level: Expert

    *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

    *) Because of the relative high percentage of added PolyCarbonate, ABSpro has a tendency to warp and therefore it is recommended to use a temperature-controlled build chamber and to prepare your heat bed with DimaFix fixative spray when 3D printing large(r) scaled objects with ABSpro.

     

    Filament length

    ρ: 1.05 g/cc 50 gr coil 0.5 Kg spool      
    Ø 1.75mm ± 19.8m ± 198m      
    Ø 2.85mm ± 7.5m ± 75m      

     

    Product export information

    HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

     

    Compliance *

    This filament is compliant to below listed directives and regulations.

    • RoHS directive 2011/65/EC

    • REACH directive 1907/2006/EC 

    *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

     

    Продуктови спецификации
    Filament Material ABS
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Тегло 500 g
    Nozzle size ≥ 0.15mm
    Print temp ± 245 - 275° C *
    Heat bed ± 110 - 120° C *
    Layer height ≥ 0.1mm
    Print speed Medium
    Fan speed 0-25%
    Flow rate ± 106%
    Retraction Yes ± 5 mm
    Experience level Expert