Tough 3D Ink® is a proprietary non-toxic thermoplastic blend made exclusively by M3D. Tough offers unprecedented utility for 3D printing due to its strength and controlled amount of flexibility. When compared to traditional filaments which have a fraction of the bond strength and are typically brittle when printed, Tough 3D Ink is bonded at full strength, allowing you to print longer-lasting objects. Tough is great for medium and large models that need to hold up in the real world or need lots of give.

HDglass е високопроизводителен PETG филамент с ненадминати свойства за 3D печат и подобрена механична якост, гъвкавост, издръжливост и устойчивост на топлина.

MetalFil - Brass is a metal-filled PLA-based filament with approximately 70% of gravimetric brass filling. This incredible high filling with brass powders enables every FDM 3D printer user to 3D print brass objects which are almost indistinguishable from genuine brass casted objects. MetalFil - Brass is easy to print and can be printed on full metal, PEEK, and PFTE hotends and can perfectly be printed with ≥ 0.4mm nozzles with retraction settings enabled on both direct drive extruders, as well as on Bowden style extruders, which is a truly unique feature for a metal-filled filament. MetalFil Brass printed objects are extremely easy to polish.

StoneFil is a PLA-based filament which is based on our modified and easy-to-print EasyFil PLA compound and is gravimetrically filled with 50% of powdered stone. This high “stone filling” has resulted in a 3D printer filament with remarkable aesthetic features and a significant higher material density up to 37% higher than “normal” PLA. StoneFil is an easy-to-print 3D printer filament and printed objects have an extremely matte stone-like finish with unique natural gradient colour linings resulting in an exceptional chromatic spectrum per print. Every StoneFil printed object will have its own identity and unique gradient colour shading.

EasyWood is a wood-filled PLA-based filament which is gravimetrically filled with approximately 40% grinded wood particles. EasyWood is a very easy to print wood filament as it is based on our EasyFil PLA compound and the 40% gravimetrical filling with grinded wood particles make the filament absolutely warp-free. EasyWood looks, feels and smells like real wood and beautiful wood-nerve structures can be obtained by grinding the printed object a bit with a piece of fine grit sandpaper or by varying with the printing temperature.

EasyWood is a wood-filled PLA-based filament which is gravimetrically filled with approximately 40% grinded wood particles. EasyWood is a very easy to print wood filament as it is based on our EasyFil PLA compound and the 40% gravimetrical filling with grinded wood particles make the filament absolutely warp-free. EasyWood looks, feels and smells like real wood and beautiful wood-nerve structures can be obtained by grinding the printed object a bit with a piece of fine grit sandpaper or by varying with the printing temperature.

Micro е предназначен за всеки. Вдъхнете живот на вашите идеи, превърнете ги в бизнес, образовайте, научете, персонализирайте продукти, направете играчки, направете бижута, стартирайте учебни програми, пуснете модерна работилница и разгърнете творчеството си. Силата на сътворението е ваша!

TitanX е модифицирана нишка за 3D принтер, базирана на ABS, със значително подобрени механични свойства и възможност за печат. TitanX е следващото поколение ABS, който 3D отпечатва с висока прецизност и нулево изкривяване.

PLA 3D Ink® is polylactic acid, a non-toxic biodegradable thermoplastic and one of the most commonly used 3D printing materials. PLA is a great entry-level filament because it is exceptionally easy to work with. PLA does not require a heated bed, makes very rigid prints, allows for consistent extrusion and bonding, and doesn’t warp much. The ability to produce some of the most accurate, good-looking parts makes it excellent for detailed prototyping. M3D offers PLA in over 29 vibrant colors across various translucency levels.

Tough 3D Ink® is a proprietary non-toxic thermoplastic blend made exclusively by M3D. Tough offers unprecedented utility for 3D printing due to its strength and controlled amount of flexibility. When compared to traditional filaments which have a fraction of the bond strength and are typically brittle when printed, Tough 3D Ink is bonded at full strength, allowing you to print longer-lasting objects. Tough is great for medium and large models that need to hold up in the real world or need lots of give.

HDglass е високопроизводителен PETG филамент с ненадминати свойства за 3D печат и подобрена механична якост, гъвкавост, издръжливост и устойчивост на топлина.

MetalFil - Brass is a metal-filled PLA-based filament with approximately 70% of gravimetric brass filling. This incredible high filling with brass powders enables every FDM 3D printer user to 3D print brass objects which are almost indistinguishable from genuine brass casted objects. MetalFil - Brass is easy to print and can be printed on full metal, PEEK, and PFTE hotends and can perfectly be printed with ≥ 0.4mm nozzles with retraction settings enabled on both direct drive extruders, as well as on Bowden style extruders, which is a truly unique feature for a metal-filled filament. MetalFil Brass printed objects are extremely easy to polish.