Close
(0) Кошница
Няма продукти в кошницата.
Категории
    Filters
    Настройки
    Търси
    Производител: BigRep GmbH

    Black

    239,79 лв.
    BigRep’s PLX filament is a PLA-derived, general-use bio performance material for open-environment 3D printing. An innovative and robust thermoplastic filament, PLX can print up to 80% faster than a standard PLA material with no modification to the 3D printer at a strength that exceeds the typical mechanical properties of even ABS-printed parts – enabling industrial additive manufacturing in large-format at unprecedented speeds. PLX is incredibly versatile, allowing printer settings to be tuned for either incredible speeds or beautifully smooth surface finishes. PLX delivers consistent, quality results that make it a reliable material for large-format printing in any industry.
    *
    *
    Наличност: Please select required attribute(s)

    BigRep’s PLX filament is a PLA-derived, general-use bio performance material for open-environment 3D printing. An innovative and robust thermoplastic filament, PLX can print up to 80% faster than a standard PLA material with no modification to the 3D printer at a strength that exceeds the typical mechanical properties of even ABS-printed parts – enabling industrial additive manufacturing in large-format at unprecedented speeds. PLX is incredibly versatile, allowing printer settings to be tuned for either incredible speeds or beautifully smooth surface finishes. PLX delivers consistent, quality results that make it a reliable material for large-format printing in any industry.

    As a material derived from organic compounds, PLX is biodegradable under the correct conditions. CO2 neutral and environmentally friendly, it has a much lower ecological impact than other plastics derived from fossil fuels.

    HIGHLIGHTS:

    • Up to 80% faster extrusion throughput
    • Versatile for fine surface finishes
    • Consistent quality results
    • Environmentally friendly thermoplastic

    Specifications

    PHYSICAL PROPERTIES:

    Material: Polylactic Acid Blend
    Filament Sizes: 2.5, 4.5 and 8.0 kg
    Diameter: 2.85 mm
    Density: 1.25 g/cm³
    Flexural Modulus (ISO 178): 2800 MPa
    Tensile Strength (ISO 527): 47 MPa
    Breaking Stress (ISO 527): 3000 MPa

     

    RECOMMENDED PRINTING CONDITIONS:

    Nozzle Temperature: 210 – 220 °C
    Print Bed Temperature: 60 °C
    Printing Speed: 40 – 120 mm/s
    Продуктови спецификации
    Filament Material PLA
    Цвят
     
    Nozzle size ≥ 0.15mm
    Print temp ± 180 - 205° C *
    Heat bed ± 0 - 60° C
    Layer height ≥ 0.1mm
    Print speed Medium
    Fan speed 50-100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner
    Напиши отзив
    • Може да оставите отзив за продукт само след като го закупите.
    • Само регистрирани потребители могат да пишат отзиви
    *
    *
    • Лошо
    • Отлично
    *
    *
    *

    BigRep’s PLX filament is a PLA-derived, general-use bio performance material for open-environment 3D printing. An innovative and robust thermoplastic filament, PLX can print up to 80% faster than a standard PLA material with no modification to the 3D printer at a strength that exceeds the typical mechanical properties of even ABS-printed parts – enabling industrial additive manufacturing in large-format at unprecedented speeds. PLX is incredibly versatile, allowing printer settings to be tuned for either incredible speeds or beautifully smooth surface finishes. PLX delivers consistent, quality results that make it a reliable material for large-format printing in any industry.

    As a material derived from organic compounds, PLX is biodegradable under the correct conditions. CO2 neutral and environmentally friendly, it has a much lower ecological impact than other plastics derived from fossil fuels.

    HIGHLIGHTS:

    • Up to 80% faster extrusion throughput
    • Versatile for fine surface finishes
    • Consistent quality results
    • Environmentally friendly thermoplastic

    Specifications

    PHYSICAL PROPERTIES:

    Material: Polylactic Acid Blend
    Filament Sizes: 2.5, 4.5 and 8.0 kg
    Diameter: 2.85 mm
    Density: 1.25 g/cm³
    Flexural Modulus (ISO 178): 2800 MPa
    Tensile Strength (ISO 527): 47 MPa
    Breaking Stress (ISO 527): 3000 MPa

     

    RECOMMENDED PRINTING CONDITIONS:

    Nozzle Temperature: 210 – 220 °C
    Print Bed Temperature: 60 °C
    Printing Speed: 40 – 120 mm/s
    Продуктови спецификации
    Filament Material PLA
    Цвят
     
    Nozzle size ≥ 0.15mm
    Print temp ± 180 - 205° C *
    Heat bed ± 0 - 60° C
    Layer height ≥ 0.1mm
    Print speed Medium
    Fan speed 50-100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner