Close
(0) Кошница
Няма продукти в кошницата.
Категории
    Filters
    Настройки
    Търси
    Производител: Form Futura

    Crystal Flex - Clear

    68,02 лв.
    Crystal Flex is a high-performance and easy to use Styrene-Butadiene Copolymer based 3D printer filament, which combines strength, resilience, semi-flexibility and transparency with printability. Crystal Flex filament is as clear as PolyCarbonate and has an extremely high surface gloss and by that can truly be called a bright filament. All these properties combined make Crystal Flex a diverse and wonderful filament to print with and which can be applied for a wide range of applications.
    *
    *
    Наличност: Please select required attribute(s)
    Crystal Flex is a high-performance and easy to use Styrene-Butadiene Copolymer based 3D printer filament, which combines strength, resilience, semi-flexibility and transparency with printability. 
    Crystal Flex filament is as clear as PolyCarbonate and has an extremely high surface gloss and by that can truly be called a bright filament. All these properties combined make Crystal Flex a diverse and wonderful filament to print with and which can be applied for a wide range of applications.

     

    Unique features

    • Plexiglass-like transparency

      • Very clear filament with 92% light transmittance and extremely high surface gloss

    • Semi-flexible, bendable and resilient

      • Shore hardness of 63D and bendable up to 230% without causing white stress marks

    • Very easy to print

      • Practically no warping due to extremely low water-absorption properties

      • Improved flowing behaviour and inter-layer adhesion

      • Good first layer adhesion to several heated print surfaces

    • Engineered to meet UL 94HB flame retardancy standards

     

    General printing guidelines *

    Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100%
    Print temp: ± 230 - 260° C Print speed: High Retraction: Yes ± 5mm
    Heat bed: ± 80 - 100° C Fan speed: 0-25% Experience level: Beginner / Intermediate

    *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

     

    Filament length

    ρ: 101 g/cc 50 gr coil 0.5 Kg spool      
    Ø 1.75mm ± 20.6m ± 206m      
    Ø 2.85mm ± 7.8m ± 78m      

     

    Product export information

    HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

     

    Compliance *

    This filament is compliant to below listed directives and regulations.

    • RoHS directive 2011/65/EC

    • REACH directive 1907/2006/EC 

    *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

     

    Продуктови спецификации
    Filament Material SBC
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Тегло 500 g
    Nozzle size ≥ 0.15mm
    Print temp ± 230 - 260° C
    Heat bed ± 80 - 100° C
    Layer height ≥ 0.1mm
    Print speed High
    Fan speed 0-25%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner / Intermediate
    Напиши отзив
    • Може да оставите отзив за продукт само след като го закупите.
    • Само регистрирани потребители могат да пишат отзиви
    *
    *
    • Лошо
    • Отлично
    *
    *
    *
    Crystal Flex is a high-performance and easy to use Styrene-Butadiene Copolymer based 3D printer filament, which combines strength, resilience, semi-flexibility and transparency with printability. 
    Crystal Flex filament is as clear as PolyCarbonate and has an extremely high surface gloss and by that can truly be called a bright filament. All these properties combined make Crystal Flex a diverse and wonderful filament to print with and which can be applied for a wide range of applications.

     

    Unique features

    • Plexiglass-like transparency

      • Very clear filament with 92% light transmittance and extremely high surface gloss

    • Semi-flexible, bendable and resilient

      • Shore hardness of 63D and bendable up to 230% without causing white stress marks

    • Very easy to print

      • Practically no warping due to extremely low water-absorption properties

      • Improved flowing behaviour and inter-layer adhesion

      • Good first layer adhesion to several heated print surfaces

    • Engineered to meet UL 94HB flame retardancy standards

     

    General printing guidelines *

    Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100%
    Print temp: ± 230 - 260° C Print speed: High Retraction: Yes ± 5mm
    Heat bed: ± 80 - 100° C Fan speed: 0-25% Experience level: Beginner / Intermediate

    *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

     

    Filament length

    ρ: 101 g/cc 50 gr coil 0.5 Kg spool      
    Ø 1.75mm ± 20.6m ± 206m      
    Ø 2.85mm ± 7.8m ± 78m      

     

    Product export information

    HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

     

    Compliance *

    This filament is compliant to below listed directives and regulations.

    • RoHS directive 2011/65/EC

    • REACH directive 1907/2006/EC 

    *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

     

    Продуктови спецификации
    Filament Material SBC
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Тегло 500 g
    Nozzle size ≥ 0.15mm
    Print temp ± 230 - 260° C
    Heat bed ± 80 - 100° C
    Layer height ≥ 0.1mm
    Print speed High
    Fan speed 0-25%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner / Intermediate