Close
(0) Кошница
Няма продукти в кошницата.
Категории
    Filters
    Настройки
    Търси
    Производител: Form Futura

    EasyFil ABS - Brown

    58,21 лв.
    EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament. EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments.
    *
    *
    Наличност: Please select required attribute(s)
    EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament. 
    EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments.
     

    Unique features

    • Superb process stability and limited warping

    • Significant higher impact resistance than average ABS

    • Very strong and durable

    • Light-weight

    • Viscat softening temperature of ± 103° C

    • Wide variety of vivid opaque colors

     

    General printing guidelines *

    Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104%
    Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm
    Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate

    *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

     

    Filament length

    ρ: 1.03 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool    
    Ø 1.75mm ± 20.2m ± 303m ± 928m    
    Ø 2.85mm ± 7.6m ± 114m ± 350m    

     

    Product export information

    HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

     

    Compliance *

    This filament is compliant to below listed directives and regulations.

    • RoHS directive 2011/65/EC

    • REACH directive 1907/2006/EC 

    *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

     

    Продуктови спецификации
    Filament Material ABS
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Тегло 750 g
    Nozzle size ≥ 0.15mm
    Print temp ± 220 - 270° C
    Heat bed ± 90 - 110° C
    Layer height ≥ 0.1mm
    Print speed Medium
    Fan speed 0-25%
    Flow rate ± 104%
    Retraction Yes ± 5 mm
    Experience level Intermediate
    Напиши отзив
    • Може да оставите отзив за продукт само след като го закупите.
    • Само регистрирани потребители могат да пишат отзиви
    *
    *
    • Лошо
    • Отлично
    *
    *
    *
    EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament. 
    EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments.
     

    Unique features

    • Superb process stability and limited warping

    • Significant higher impact resistance than average ABS

    • Very strong and durable

    • Light-weight

    • Viscat softening temperature of ± 103° C

    • Wide variety of vivid opaque colors

     

    General printing guidelines *

    Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104%
    Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm
    Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate

    *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

     

    Filament length

    ρ: 1.03 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool    
    Ø 1.75mm ± 20.2m ± 303m ± 928m    
    Ø 2.85mm ± 7.6m ± 114m ± 350m    

     

    Product export information

    HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

     

    Compliance *

    This filament is compliant to below listed directives and regulations.

    • RoHS directive 2011/65/EC

    • REACH directive 1907/2006/EC 

    *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

     

    Продуктови спецификации
    Filament Material ABS
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Тегло 750 g
    Nozzle size ≥ 0.15mm
    Print temp ± 220 - 270° C
    Heat bed ± 90 - 110° C
    Layer height ≥ 0.1mm
    Print speed Medium
    Fan speed 0-25%
    Flow rate ± 104%
    Retraction Yes ± 5 mm
    Experience level Intermediate