Close
(0) Кошница
Няма продукти в кошницата.
Категории
    Filters
    Настройки
    Търси
    Производител: EnvisionTec

    EPIC

    780,00 лв.
    3D печатащ материал с ниско съдържание на восък, EPIC осигурява резултати, подобни на EnvisionTEC PIC материала без восъци, но с 8% течен восък за по-ниско топлинно разширение по време на изгаряне. Идеален за клиенти, които изискват гъвкавост между големи и малки парчета и имат експертен контрол на качеството при леене.
    Наличност: В наличност

    EnvisionTEC’s Epic has been developed for direct investment casting of products for the jewelry market. It offers excellent burn out properties and builds with the highest quality and crisp detail.

    Parts made using Epic evaporate at moderate burn-out temperatures without reacting with your investment and offer an extremely low thermal expansion. This material is optimally suitable for producing precious metal castings. EnvisionTEC EPIC builds extremely smooth surfaces. The burn out process is ash free, allowing for a casting which is free from porosity - a problem which is a result of the ash residue when burning a polymer based material.

    Продуктови спецификации
    Viscosity 362 MPa
    Tensile Strength 16.8 MPa
    Elongation at Break 7.46 %
    Flexural Strength 23 MPa
    Flexural Modulus 404 MPa
    Bending Strain 10.2%
    Izod Impact – Notched 11.03 kJ/m2
    Density 1.178 g/cm3
    Hardness Shore D 69
    Ignition Temperature 350°C
    Напиши отзив
    • Може да оставите отзив за продукт само след като го закупите.
    • Само регистрирани потребители могат да пишат отзиви
    *
    *
    • Лошо
    • Отлично
    *
    *
    *

    EnvisionTEC’s Epic has been developed for direct investment casting of products for the jewelry market. It offers excellent burn out properties and builds with the highest quality and crisp detail.

    Parts made using Epic evaporate at moderate burn-out temperatures without reacting with your investment and offer an extremely low thermal expansion. This material is optimally suitable for producing precious metal castings. EnvisionTEC EPIC builds extremely smooth surfaces. The burn out process is ash free, allowing for a casting which is free from porosity - a problem which is a result of the ash residue when burning a polymer based material.

    Продуктови спецификации
    Viscosity 362 MPa
    Tensile Strength 16.8 MPa
    Elongation at Break 7.46 %
    Flexural Strength 23 MPa
    Flexural Modulus 404 MPa
    Bending Strain 10.2%
    Izod Impact – Notched 11.03 kJ/m2
    Density 1.178 g/cm3
    Hardness Shore D 69
    Ignition Temperature 350°C