FlexiFil is a rubber-like high-performance and partially bio-based flexible TPC (Thermoplastic Co-Polyester) type of 3D printer filament.
FlexiFil has unique flexural strength properties, as 3D printed objects with FlexiFil will have a “flexural memory”, allowing objects to return back to their original position or shape after being bent, dent, or folded. Next to this FlexiFil offers a unique combination of flexibility, long term heat resistance, strength, excellent UV resistance and good resistance to chemicals.
Unique features
-
Very flexible filament with “flexural memory”
-
-
High impact resistance
-
-
Strong & durable
-
Good resistance to chemicals
-
Excellent UV resistance
-
IEC 60695-11-10 Flammability classification: HB
-
43% renewable bio-based content
General printing guidelines *
| Nozzle size: ≥ 0.15mm |
Layer height: ≥ 0.1mm |
Flow rate: ± 100% |
| Print temp: ± 220 - 260° C |
Print speed: Low |
Retraction: Yes ± 5mm |
| Heat bed: ± 90 - 110° C |
Fan speed: 50-100% |
Experience level: Intermediate / Expert |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
Filament length
| ρ: 1.14 g/cc |
50 gr coil |
0.5 Kg spool |
|
|
|
| Ø 1.75mm |
± 18.2m |
± 182m |
|
|
|
| Ø 2.85mm |
± 6.9m |
± 69m |
|
|
|
Product export information
| HS Code: 39169090 |
Description: Monofilament |
Country of origin: the Netherlands |
Compliance *
This filament is compliant to below listed directives and regulations.
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.
