Close
(0) Кошница
Няма продукти в кошницата.
Категории
    Filters
    Настройки
    Търси
    Производител: Form Futura

    Galaxy PLA - Champagne Gold

    68,02 лв.
    Galaxy PLA is a deep metallic coloured PLA range - based on our EasyFil PLA compound - with an incredibly high amount of silver aluminium-flakes added. The high added aluminium-flake content gives a beautiful sparkling, reflecting and glittering finish to Galaxy PLA printed objects. Due to the high amount of silver aluminium-flakes added to the Galaxy PLA compound you can 3D print beautiful shimmering objects without visible layers and subtle colour shadings and radiance. Even though its high silver-aluminium-flaked content Galaxy PLA is not abrasive to the nozzle of your 3D printer.
    *
    *
    Наличност: Please select required attribute(s)
    Galaxy PLA is a deep metallic coloured PLA range - based on our EasyFil PLA compound - with an incredibly high amount of silver aluminium-flakes added. The high added aluminium-flake content gives a beautiful sparkling, reflecting and glittering finish to Galaxy PLA printed objects.
    Due to the high amount of silver aluminium-flakes added to the Galaxy PLA compound you can 3D print beautiful shimmering objects without visible layers and subtle colour shadings and radiance. Even though its high silver-aluminium-flaked content Galaxy PLA is not abrasive to the nozzle of your 3D printer.

     

    Unique features

    • Extremely glittering & shimmering surface finish

    • 3D print objects without visible layers

    • Not abrasive to the nozzle of 3D printers

    • Incredibly deep coloured 3D printer filament

    • Very easy to print

      • Warp-free printing and no deformation after cooling

      • Improved flowing behaviour and inter-layer adhesion

      • Good first layer adhesion to several (un)heated print surfaces

     

    General printing guidelines *

     

    Nozzle size: ≥ 0.4mm Layer height: > 0.1mm Flow rate: ± 100%
    Print temp: ± 200 - 230° C Print speed: Medium Retraction: Yes ± 5mm
    Heat bed: ± 0 - 60° C Fan speed: 50-100% Printing surface: Blue Tape / Glass
    Enclosed printer needed: No Heated Build Chamber: No Experience level: Beginner

    *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

     

    Filament length

    ρ: 1.24 g/cc 50 gr coil 0.75 Kg spool      
    Ø 1.75mm ± 16.8m ± 251m      
    Ø 2.85mm ± 6.3m ± 95m      

     

    Product export information

    HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

     

    Compliance *

    This filament is compliant to below listed directives and regulations.

    • RoHS directive 2011/65/EC

    • REACH directive 1907/2006/EC

    *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

    Продуктови спецификации
    Filament Material PLA
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Тегло 750 g
    Nozzle size ≥ 0.4mm
    Print temp ± 200 - 230° C
    Heat bed ± 0 - 60° C
    Layer height ≥ 0.1mm
    Print speed Medium
    Fan speed 50-100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner
    Enclosed printer needed No
    Heated Build Chamber No
    Printing surface Blue Tape / Glass
    Напиши отзив
    • Може да оставите отзив за продукт само след като го закупите.
    • Само регистрирани потребители могат да пишат отзиви
    *
    *
    • Лошо
    • Отлично
    *
    *
    *
    Galaxy PLA is a deep metallic coloured PLA range - based on our EasyFil PLA compound - with an incredibly high amount of silver aluminium-flakes added. The high added aluminium-flake content gives a beautiful sparkling, reflecting and glittering finish to Galaxy PLA printed objects.
    Due to the high amount of silver aluminium-flakes added to the Galaxy PLA compound you can 3D print beautiful shimmering objects without visible layers and subtle colour shadings and radiance. Even though its high silver-aluminium-flaked content Galaxy PLA is not abrasive to the nozzle of your 3D printer.

     

    Unique features

    • Extremely glittering & shimmering surface finish

    • 3D print objects without visible layers

    • Not abrasive to the nozzle of 3D printers

    • Incredibly deep coloured 3D printer filament

    • Very easy to print

      • Warp-free printing and no deformation after cooling

      • Improved flowing behaviour and inter-layer adhesion

      • Good first layer adhesion to several (un)heated print surfaces

     

    General printing guidelines *

     

    Nozzle size: ≥ 0.4mm Layer height: > 0.1mm Flow rate: ± 100%
    Print temp: ± 200 - 230° C Print speed: Medium Retraction: Yes ± 5mm
    Heat bed: ± 0 - 60° C Fan speed: 50-100% Printing surface: Blue Tape / Glass
    Enclosed printer needed: No Heated Build Chamber: No Experience level: Beginner

    *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

     

    Filament length

    ρ: 1.24 g/cc 50 gr coil 0.75 Kg spool      
    Ø 1.75mm ± 16.8m ± 251m      
    Ø 2.85mm ± 6.3m ± 95m      

     

    Product export information

    HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

     

    Compliance *

    This filament is compliant to below listed directives and regulations.

    • RoHS directive 2011/65/EC

    • REACH directive 1907/2006/EC

    *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

    Продуктови спецификации
    Filament Material PLA
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Тегло 750 g
    Nozzle size ≥ 0.4mm
    Print temp ± 200 - 230° C
    Heat bed ± 0 - 60° C
    Layer height ≥ 0.1mm
    Print speed Medium
    Fan speed 50-100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner
    Enclosed printer needed No
    Heated Build Chamber No
    Printing surface Blue Tape / Glass