Close
(0) Кошница
Няма продукти в кошницата.
Категории
    Filters
    Настройки
    Търси
    Производител: ColorFABB

    HT BLACK

    105,72 лв.
    A must for all portfolios and one of the most enduring colors. This black gives a silky smooth finish.
    *
    *
    Наличност: Please select required attribute(s)

    A must for all portfolios and one of the most enduring colors. This black gives a silky smooth finish.

    At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using colorFabb 3d printing filament.

     

    Adviced 3d printing temperature:
    250-280C

    Adviced 3d print speed:
    30 - 50 mm/s

    Advised Heated bed
    100-120C

    Build platform
    colorFabb_HT gives best results on a heated build platform, 100C to about 120C is usually needed for proper adhesion to a glass plate. When this is not enough it’s possible to use buildTak plate for stronger adhesion

     

    Since colorFabb develops and produces their own filaments we have a lot of knowhow about our materials. Here you’ll find all kinds of interesting material specifications that will help you decide which material is best for your project.

     

    Material: 

    colorFabb_HT CO-POLYESTER 
    colorFabb_HT is enabled by Eastman Tritan™ copolyester technology

     

    Diameter Tolerance:
    ± 0.1 mm

     

    Density: 
    1.18 g/cm3

     

    Glass Transition Temperature:
    100C

    Продуктови спецификации
    Filament Material CO-Polyester
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Тегло 700 g
    Nozzle size ≥ 0.15mm
    Print temp ± 250 - 280° C *
    Heat bed ± 100 - 120° C *
    Layer height ≥ 0.1mm
    Print speed 30 - 50 mm/s
    Fan speed 50-100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner
    Напиши отзив
    • Може да оставите отзив за продукт само след като го закупите.
    • Само регистрирани потребители могат да пишат отзиви
    *
    *
    • Лошо
    • Отлично
    *
    *
    *

    A must for all portfolios and one of the most enduring colors. This black gives a silky smooth finish.

    At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using colorFabb 3d printing filament.

     

    Adviced 3d printing temperature:
    250-280C

    Adviced 3d print speed:
    30 - 50 mm/s

    Advised Heated bed
    100-120C

    Build platform
    colorFabb_HT gives best results on a heated build platform, 100C to about 120C is usually needed for proper adhesion to a glass plate. When this is not enough it’s possible to use buildTak plate for stronger adhesion

     

    Since colorFabb develops and produces their own filaments we have a lot of knowhow about our materials. Here you’ll find all kinds of interesting material specifications that will help you decide which material is best for your project.

     

    Material: 

    colorFabb_HT CO-POLYESTER 
    colorFabb_HT is enabled by Eastman Tritan™ copolyester technology

     

    Diameter Tolerance:
    ± 0.1 mm

     

    Density: 
    1.18 g/cm3

     

    Glass Transition Temperature:
    100C

    Продуктови спецификации
    Filament Material CO-Polyester
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Тегло 700 g
    Nozzle size ≥ 0.15mm
    Print temp ± 250 - 280° C *
    Heat bed ± 100 - 120° C *
    Layer height ≥ 0.1mm
    Print speed 30 - 50 mm/s
    Fan speed 50-100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner