Close
(0) Кошница
Няма продукти в кошницата.
Категории
    Filters
    Настройки
    Търси
    Производител: Form Futura

    Matt PLA - Gunmetal Grey Camouflage

    68,02 лв.
    Formfutura Matt PLA (polylactic acid) is modified to have a rough and matt surface finish. Matt PLA has excellent 3D printing properties and combines a distinguished surface quality with fine details reinforced by its matt appearance.
    *
    *
    Наличност: Please select required attribute(s)
    Formfutura Matt PLA (polylactic acid) is modified to have a rough and matt surface finish. Matt PLA has excellent 3D printing properties and combines a distinguished surface quality with fine details reinforced by its matt appearance.

     

    Key features

    • Good surface quality

      • Rough and matt surface finish with fine detail

    • Easy to print at high printing speeds

      • Warp-free printing and improved flowing behaviour

      • Excellent first layer adhesion to several (un)heated print surfaces 

    • Compatible with AquaSolve PVA

    • Wide variety of matt PLA colours

     

    Applications

    • Household tools

    • Architectural mock-ups

    • Complex educational projects and models

    • Concept models

    • Manufacturing and visualization aids

     

    Abbrassiveness

    Matt PLA is modified with fillers that can have an abrasive effect on brass nozzles. We recommend to use hardened steel nozzles when 3D printing with Matt PLA.

    General printing guidelines *

    Nozzle size: ≥ 0.15mm Layer height: ≥ 0.10mm Experience level: Beginner
    Print temp: ± 215 - 230° C Fan speed: 50-100%  
    Heat bed: ± 0 - 60° C Enclosure needed: No  

    *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.

     

    Filament length

    ρ: 1.24 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool
    Ø 1.75mm ± 15.1m ± 226m ± 693m ± 1356m ± 2410m
    Ø 2.85mm ± 5.7m ± 85m ± 261m ± 511m ± 909m

     

    Product export information

    HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

     

    Compliance *

    This filament is compliant to below-listed directives and regulations.

    • RoHS directive 2011/65/EC

    • REACH directive 1907/2006/EC

    *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.

    Продуктови спецификации
    Filament Material PLA
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Тегло 750 g
    Nozzle size ≥ 0.15mm
    Print temp ± 215 - 230° C
    Heat bed ± 0 - 60° C
    Layer height ≥ 0.1mm
    Fan speed 50-100%
    Enclosed printer needed No
    Experience level Beginner
    Напиши отзив
    • Може да оставите отзив за продукт само след като го закупите.
    • Само регистрирани потребители могат да пишат отзиви
    *
    *
    • Лошо
    • Отлично
    *
    *
    *
    Formfutura Matt PLA (polylactic acid) is modified to have a rough and matt surface finish. Matt PLA has excellent 3D printing properties and combines a distinguished surface quality with fine details reinforced by its matt appearance.

     

    Key features

    • Good surface quality

      • Rough and matt surface finish with fine detail

    • Easy to print at high printing speeds

      • Warp-free printing and improved flowing behaviour

      • Excellent first layer adhesion to several (un)heated print surfaces 

    • Compatible with AquaSolve PVA

    • Wide variety of matt PLA colours

     

    Applications

    • Household tools

    • Architectural mock-ups

    • Complex educational projects and models

    • Concept models

    • Manufacturing and visualization aids

     

    Abbrassiveness

    Matt PLA is modified with fillers that can have an abrasive effect on brass nozzles. We recommend to use hardened steel nozzles when 3D printing with Matt PLA.

    General printing guidelines *

    Nozzle size: ≥ 0.15mm Layer height: ≥ 0.10mm Experience level: Beginner
    Print temp: ± 215 - 230° C Fan speed: 50-100%  
    Heat bed: ± 0 - 60° C Enclosure needed: No  

    *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.

     

    Filament length

    ρ: 1.24 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool
    Ø 1.75mm ± 15.1m ± 226m ± 693m ± 1356m ± 2410m
    Ø 2.85mm ± 5.7m ± 85m ± 261m ± 511m ± 909m

     

    Product export information

    HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

     

    Compliance *

    This filament is compliant to below-listed directives and regulations.

    • RoHS directive 2011/65/EC

    • REACH directive 1907/2006/EC

    *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.

    Продуктови спецификации
    Filament Material PLA
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Тегло 750 g
    Nozzle size ≥ 0.15mm
    Print temp ± 215 - 230° C
    Heat bed ± 0 - 60° C
    Layer height ≥ 0.1mm
    Fan speed 50-100%
    Enclosed printer needed No
    Experience level Beginner