Close
(0) Кошница
Няма продукти в кошницата.
Категории
    Filters
    Настройки
    Търси
    Производител: ColorFABB

    NGEN DARK GREEN

    84,55 лв.
    A lush and full green color uniquely suited for printing parts that require a more formal and classical look. A solid color that has yet to let us down and therefor one of our favorites.
    *
    *
    Наличност: Please select required attribute(s)

    A lush and full green color uniquely suited for printing parts that require a more formal and classical look. A solid color that has yet to let us down and therefor one of our favorites.

    At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using colorFabb 3d printing filament.

    Adviced 3d printing temperature:
    220-240C

    Adviced 3d print speed:
    40 - 70 mm/s

    Advised Heated bed
    75-85C

    Build platform
    nGen gives best results on a heated build platform, 75C to about 85C is usually needed for proper adhesion to a glass plate.
    Printing on a cold bed is possible but you’ll need some adhesion tools to minimize warping. 3DLac, buildTak or 3DEeze can do the trick.

    Since colorFabb develops and produces their own filaments we have a lot of knowhow about our materials. Here you’ll find all kinds of interesting material specifications that will help you decide which material is best for your project.

    Material: 
    colorFabb nGen
    Diameter Tolerance:
    ± 0.05 mm
    Density: 
    1.20 g/cm3
    Glass Transition Temperature:
    85C

     

    Продуктови спецификации
    Filament Material CO-Polyester
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Тегло 750 g
    Nozzle size ≥ 0.15mm
    Print temp ± 220 - 240° C
    Heat bed ± 75 - 85° C *
    Layer height ≥ 0.1mm
    Print speed 40 - 70 mm/s
    Fan speed 50-100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner
    Напиши отзив
    • Може да оставите отзив за продукт само след като го закупите.
    • Само регистрирани потребители могат да пишат отзиви
    *
    *
    • Лошо
    • Отлично
    *
    *
    *

    A lush and full green color uniquely suited for printing parts that require a more formal and classical look. A solid color that has yet to let us down and therefor one of our favorites.

    At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using colorFabb 3d printing filament.

    Adviced 3d printing temperature:
    220-240C

    Adviced 3d print speed:
    40 - 70 mm/s

    Advised Heated bed
    75-85C

    Build platform
    nGen gives best results on a heated build platform, 75C to about 85C is usually needed for proper adhesion to a glass plate.
    Printing on a cold bed is possible but you’ll need some adhesion tools to minimize warping. 3DLac, buildTak or 3DEeze can do the trick.

    Since colorFabb develops and produces their own filaments we have a lot of knowhow about our materials. Here you’ll find all kinds of interesting material specifications that will help you decide which material is best for your project.

    Material: 
    colorFabb nGen
    Diameter Tolerance:
    ± 0.05 mm
    Density: 
    1.20 g/cm3
    Glass Transition Temperature:
    85C

     

    Продуктови спецификации
    Filament Material CO-Polyester
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Тегло 750 g
    Nozzle size ≥ 0.15mm
    Print temp ± 220 - 240° C
    Heat bed ± 75 - 85° C *
    Layer height ≥ 0.1mm
    Print speed 40 - 70 mm/s
    Fan speed 50-100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner