Close
(0) Кошница
Няма продукти в кошницата.
Категории
    Filters
    Настройки
    Търси
    Производител: ColorFABB

    NGEN_FLEX BLACK

    93,96 лв.
    nGen_flex beautiful glossy black. nGen_FLEX is best described as a semi-flexible material with good printability on most 3D printers eliminating the use for specialized flex extruders. It’s rated at a Shore A hardness level of 95. By adjusting infill and perimeter settings it’s possible to influence how flexible a part should feel after printing. nGen_FLEX is processed at 240C/260C on most 3D printers. ! For best adhesion to the buildplate we highly recommend to use a buildTak plate.
    *
    *
    Наличност: Please select required attribute(s)

    nGen_flex beautiful glossy black.

    nGen_FLEX is a new elastomer material added to our existing range of co-polyester functional 3D printing filaments.

    nGen-FLEX is best described as a semi-flexible material with good printability on most 3D printers eliminating the use for specialized flex extruders. It’s rated at a Shore A hardness level of 95.. Of course the user can influence how flexible a print should feel by adjusting infill and perimeter settings.

    nGen_FLEX is an engineering-grade material that demonstrates excellent durability, toughness and great layer-to-layer adhesion.

    What makes nGen_FLEX standout from other semi-flexible materials is the great chemical resistance and temperature resistance of up to 121C. Enabling parts to be steam sterilized at 123C cycle.

    ! For best adhesion to the buildplate we highly recommend to use a buildTak plate.

    At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using colorFabb 3d printing filament.

    Adviced 3d printing temperature:
    240-260C

    Adviced 3d print speed:
    40 - 60 mm/s

    Advised Heated bed
    80C + buildTak

    Build platform
    nGen_FLEX gives best results on a buildTak covered buildplate, heated at around 80C. Make sure the distance between nozzle and buildplate is not too close, first layer should not be squeezed too much.

    Since colorFabb develops and produces their own filaments we have a lot of knowhow about our materials. Here you’ll find all kinds of interesting material specifications that will help you decide which material is best for your project.

    Material: 
    colorFabb nGen_FLEX
    Diameter Tolerance:
    ± 0.1 mm
    Density: 
    1.13 g/cm3
    Temperature resistance:
    130C

    Продуктови спецификации
    Filament Material CO-Polyester
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Тегло 650 g
    Nozzle size ≥ 0.15mm
    Print temp ± 240 - 260° C *
    Heat bed 80° C + buildTak
    Layer height ≥ 0.1mm
    Print speed 40 - 60 mm/s
    Fan speed 50-100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner
    Напиши отзив
    • Може да оставите отзив за продукт само след като го закупите.
    • Само регистрирани потребители могат да пишат отзиви
    *
    *
    • Лошо
    • Отлично
    *
    *
    *

    nGen_flex beautiful glossy black.

    nGen_FLEX is a new elastomer material added to our existing range of co-polyester functional 3D printing filaments.

    nGen-FLEX is best described as a semi-flexible material with good printability on most 3D printers eliminating the use for specialized flex extruders. It’s rated at a Shore A hardness level of 95.. Of course the user can influence how flexible a print should feel by adjusting infill and perimeter settings.

    nGen_FLEX is an engineering-grade material that demonstrates excellent durability, toughness and great layer-to-layer adhesion.

    What makes nGen_FLEX standout from other semi-flexible materials is the great chemical resistance and temperature resistance of up to 121C. Enabling parts to be steam sterilized at 123C cycle.

    ! For best adhesion to the buildplate we highly recommend to use a buildTak plate.

    At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using colorFabb 3d printing filament.

    Adviced 3d printing temperature:
    240-260C

    Adviced 3d print speed:
    40 - 60 mm/s

    Advised Heated bed
    80C + buildTak

    Build platform
    nGen_FLEX gives best results on a buildTak covered buildplate, heated at around 80C. Make sure the distance between nozzle and buildplate is not too close, first layer should not be squeezed too much.

    Since colorFabb develops and produces their own filaments we have a lot of knowhow about our materials. Here you’ll find all kinds of interesting material specifications that will help you decide which material is best for your project.

    Material: 
    colorFabb nGen_FLEX
    Diameter Tolerance:
    ± 0.1 mm
    Density: 
    1.13 g/cm3
    Temperature resistance:
    130C

    Продуктови спецификации
    Filament Material CO-Polyester
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Тегло 650 g
    Nozzle size ≥ 0.15mm
    Print temp ± 240 - 260° C *
    Heat bed 80° C + buildTak
    Layer height ≥ 0.1mm
    Print speed 40 - 60 mm/s
    Fan speed 50-100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner