Close
(0) Кошница
Няма продукти в кошницата.
Категории
    Filters
    Настройки
    Търси
    Производител: ColorFABB

    NT Cheetah Midnight

    99,60 лв.
    Cheetah™ flexible filament is the fastest and easiest to print flexible filament on the market. The focus in development of this material was on optimizing the user experience. The result is a filament that is printable across all types of desktop 3D printers at ABS and PLA speeds, many times twice the speed of other flexible materials on the market. Cheetah filament possesses industry leading durability along with impact strength 84% greater than the next product(ABS). The abrasion resistance is also second only to NinjaTek’s Armadillo product, making Cheetah the perfect blend of speed, toughness and strength. Suggested Applications: grips, guides, hinges, sleeves & snap-fit parts. Shore Hardness = 95A Prints at speeds greater than 60 mm/s with standard ABS settings Significantly greater impact strength than all widely used materials – 84% greater than ABS! Industry leading toughness and durability to ensure longevity in printed parts Abrasion resistance 40% better than ABS and 76% better than PLA 580% elongation capabilities improve ability to withstand wear and tear Patented low friction exterior allows for smooth feeding Chemical resistance to many materials, including: naphtha, ASTM Oils #1-3, petroleum and freon Consistent diameter and material properties providing reliable, high quality prints REACH and RoHS 2002/95/EC Directive compliant
    *
    *
    Наличност: Please select required attribute(s)

    Cheetah™ flexible filament is the fastest and easiest to print flexible filament on the market. The focus in development of this material was on optimizing the user experience. The result is a filament that is printable across all types of desktop 3D printers at ABS and PLA speeds, many times twice the speed of other flexible materials on the market.

    Cheetah filament possesses industry leading durability along with impact strength 84% greater than the next product(ABS). The abrasion resistance is also second only to NinjaTek’s Armadillo product, making Cheetah the perfect blend of speed, toughness and strength.

    Suggested Applications: grips, guides, hinges, sleeves & snap-fit parts.

    • Shore Hardness = 95A
    • Prints at speeds greater than 60 mm/s with standard ABS settings
    • Significantly greater impact strength than all widely used materials – 84% greater than ABS!
    • Industry leading toughness and durability to ensure longevity in printed parts
    • Abrasion resistance 40% better than ABS and 76% better than PLA
    • 580% elongation capabilities improve ability to withstand wear and tear
    • Patented low friction exterior allows for smooth feeding
    • Chemical resistance to many materials, including: naphtha, ASTM Oils #1-3, petroleum and freon
    • Consistent diameter and material properties providing reliable, high quality prints
    •  REACH and RoHS 2002/95/EC Directive compliant

    Extruder Temperature:  230°C – 240°C
    Platform Temperature: Room temperature – 40°C
    Glue or blue painters tape is suggested if not using a heated bed. 

    Print Speed:
    Top and bottom layers: 30-45 mm/ sec (1800-2700 mm/ min)
    Infill speeds: 60-80 mm/ sec (3600-4800 mm/ min)
    Layer 2+ use cooling fan if available.

    Продуктови спецификации
    Filament Material TPU
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Тегло 500 g
    Nozzle size ≥ 0.15mm
    Print temp ± 230 - 240° C
    Heat bed ± 100 - 120° C *
    Layer height ≥ 0.1mm
    Print speed 60-80 mm/ sec
    Fan speed 100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner
    Напиши отзив
    • Може да оставите отзив за продукт само след като го закупите.
    • Само регистрирани потребители могат да пишат отзиви
    *
    *
    • Лошо
    • Отлично
    *
    *
    *

    Cheetah™ flexible filament is the fastest and easiest to print flexible filament on the market. The focus in development of this material was on optimizing the user experience. The result is a filament that is printable across all types of desktop 3D printers at ABS and PLA speeds, many times twice the speed of other flexible materials on the market.

    Cheetah filament possesses industry leading durability along with impact strength 84% greater than the next product(ABS). The abrasion resistance is also second only to NinjaTek’s Armadillo product, making Cheetah the perfect blend of speed, toughness and strength.

    Suggested Applications: grips, guides, hinges, sleeves & snap-fit parts.

    • Shore Hardness = 95A
    • Prints at speeds greater than 60 mm/s with standard ABS settings
    • Significantly greater impact strength than all widely used materials – 84% greater than ABS!
    • Industry leading toughness and durability to ensure longevity in printed parts
    • Abrasion resistance 40% better than ABS and 76% better than PLA
    • 580% elongation capabilities improve ability to withstand wear and tear
    • Patented low friction exterior allows for smooth feeding
    • Chemical resistance to many materials, including: naphtha, ASTM Oils #1-3, petroleum and freon
    • Consistent diameter and material properties providing reliable, high quality prints
    •  REACH and RoHS 2002/95/EC Directive compliant

    Extruder Temperature:  230°C – 240°C
    Platform Temperature: Room temperature – 40°C
    Glue or blue painters tape is suggested if not using a heated bed. 

    Print Speed:
    Top and bottom layers: 30-45 mm/ sec (1800-2700 mm/ min)
    Infill speeds: 60-80 mm/ sec (3600-4800 mm/ min)
    Layer 2+ use cooling fan if available.

    Продуктови спецификации
    Filament Material TPU
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Тегло 500 g
    Nozzle size ≥ 0.15mm
    Print temp ± 230 - 240° C
    Heat bed ± 100 - 120° C *
    Layer height ≥ 0.1mm
    Print speed 60-80 mm/ sec
    Fan speed 100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner