Close
(0) Кошница
Няма продукти в кошницата.
Категории
    Filters
    Настройки
    Търси
    Производител: ColorFABB

    NT NinjaFlex Sapphire

    99,60 лв.
    NinjaFlex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Its consistency in diameter and ovality (roundness) outpaces other polyurethane materials. Made from a specially formulated thermoplastic polyurethane (TPU) material, this patented technology boasts a low-tack, easy-to-feed texture. The result is uniquely flexible, strong prints ideal for direct-drive extruders. Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications.
    *
    *
    Наличност: Please select required attribute(s)

    NinjaFlex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Its consistency in diameter and ovality (roundness) outpaces other polyurethane materials.

    Made from a specially formulated thermoplastic polyurethane (TPU) material, this patented technology boasts a low-tack, easy-to-feed texture. The result is uniquely flexible, strong prints ideal for direct-drive extruders.

    Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications.

    Extruder Temperature:  225°C – 235°C
    Platform Temperature: Room temperature – 40°C
    Glue and/ or blue painters tape is suggested if not using a heated bed.

    Print Speed:
    Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min)
    Infill speeds: 15-35 mm/ sec (900-2100 mm/ min)
    Layer 2+ use cooling fan if available.

    Продуктови спецификации
    Filament Material TPU
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Тегло 500 g
    Nozzle size ≥ 0.15mm
    Print temp ± 225 - 235° C *
    Heat bed ± 100 - 120° C *
    Layer height ≥ 0.1mm
    Print speed 15-35 mm/ sec
    Fan speed 100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner
    Напиши отзив
    • Може да оставите отзив за продукт само след като го закупите.
    • Само регистрирани потребители могат да пишат отзиви
    *
    *
    • Лошо
    • Отлично
    *
    *
    *

    NinjaFlex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Its consistency in diameter and ovality (roundness) outpaces other polyurethane materials.

    Made from a specially formulated thermoplastic polyurethane (TPU) material, this patented technology boasts a low-tack, easy-to-feed texture. The result is uniquely flexible, strong prints ideal for direct-drive extruders.

    Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications.

    Extruder Temperature:  225°C – 235°C
    Platform Temperature: Room temperature – 40°C
    Glue and/ or blue painters tape is suggested if not using a heated bed.

    Print Speed:
    Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min)
    Infill speeds: 15-35 mm/ sec (900-2100 mm/ min)
    Layer 2+ use cooling fan if available.

    Продуктови спецификации
    Filament Material TPU
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Тегло 500 g
    Nozzle size ≥ 0.15mm
    Print temp ± 225 - 235° C *
    Heat bed ± 100 - 120° C *
    Layer height ≥ 0.1mm
    Print speed 15-35 mm/ sec
    Fan speed 100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner