Pegasus PP Ultralight is most likely the lightest filament in the world!
Pegasus PP Ultralight is a nanotechnology enhanced compound based on our Centaur PP plus other PP grades and various impact modifiers and binding agents. Due to the nanotechnology applied Pegasus PP Ultralight has a 20% lower weight and/or density than regular PP. Pegasus PP Ultralight combines all the mechanical properties of PP with an extremely lightweight and by that makes it a very suitable material for applications such as automotive, drones, floating applications, wear resistant & durable applications, etc…
Unique features
-
Extremely lightweight
-
-
Good wear-, abrasion-, and fatigue resistance
-
High chemical resistance
-
Does not absorb moisture
-
Excellent interlayer adhesion
-
Excellent adhesion to Eurocel LDPE Tape (PE 920)
General printing guidelines *
| Nozzle size: ≥ 0.4mm |
Layer height: ≥ 0.1mm |
Flow rate: ± 104% |
| Print temp: ± 215 - 245° C |
Print speed: Medium / High |
Retraction: Yes ± 5mm |
| Heat bed: ± 0 - 100° C * |
Fan speed: 50-100% |
Experience level: Intermediate |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
*) Large Pegasus PP Ultralight prints can be printed on an unheated 2mm or 3mm PP plate, which can be attached to the print bed. Smaller prints can be printed on standard PP packaging tape.
Filament length
| ρ: 0.75 g/cc |
50 gr coil |
0.5 Kg spool |
|
|
|
| Ø 1.75mm |
± 27.7m |
± 277m |
|
|
|
| Ø 2.85mm |
± 10.5m |
± 105m |
|
|
|
Product export information
| HS Code: 39169090 |
Description: Monofilament |
Country of origin: the Netherlands |
Compliance *
This filament is compliant to below listed directives and regulations.
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.
