Close
(0) Кошница
Няма продукти в кошницата.
Категории
    Filters
    Настройки
    Търси
    Производител: M3D

    PETG Blue

    40,80 лв.
    ABS-R 3D Ink® is M3D’s non-toxic proprietary blend of PETG that was designed to serve as an ABS replacement filament for engineering needs. In other words, ABS-R is a very high-end formulation of PETG that exerts its most superior qualities.
    *
    *
    Наличност: Please select required attribute(s)

    ABS-R 3D Ink® is M3D’s non-toxic proprietary blend of PETG that was designed to serve as an ABS replacement filament for engineering needs. In other words, ABS-R is a very high-end formulation of PETG that exerts its most superior qualities.

    It has increased bonding and lower warp, and does not require a heated print bed, making it a more accessible alternative while still offering the same capabilities of ABS. ABS-R is great for professional engineering where parts need to be machined or have complex overhangs and need to have just a little give.

    Technical Specifications:

    • Guaranteed Filament Length: 250ft / 76.2m
    • Estimated Product Weight: 0.55lb / 250g
    • Filament Diameter: 1.75mm (not chipped, can be used with almost all 3D printers). The 3-letter code printed on the spool will automatically set the correct extrusion temperature in the M3D software for the Micro, Micro+, and the Pro.
    • Shore Hardness: R105
    • Material Density (ISO 1183): 1.27g/cm3
    • Recommended Extrusion Temperature: 215 - 235°C
    • Recommended Heated Print Bed Temperature: 87 - 105°C when used, but it is not required
    • Recommended Build Surfaces: M3D printbed sheet, painter's tape, glue stick, heated bed, hairspray
    • Other Printer Requirements: Part cooling fan

    Pro Tip:

    To prevent clogged nozzles when changing between filaments, we suggest having separate nozzles when using Carbon Fiber and ABS-R lines of filament. Why? Due to the different heat requirements and material properties of these higher-temp, particle-filled filaments, it becomes difficult for softer, lower-temp filaments like PLA and Tough to completely push out Carbon Fiber and ABS-R from the nozzle.

    Продуктови спецификации
    Filament Material PETG
    Filament Diameter 1.75 mm
    Цвят
     
    Тегло 250 g
    Nozzle size ≥ 0.3mm
    Print temp ± 215 - 235° C
    Heat bed ± 87 - 105° C
    Layer height ≥ 0.1mm
    Print speed Medium-Fast
    Fan speed 50-100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Intermediate
    Напиши отзив
    • Може да оставите отзив за продукт само след като го закупите.
    • Само регистрирани потребители могат да пишат отзиви
    *
    *
    • Лошо
    • Отлично
    *
    *
    *

    ABS-R 3D Ink® is M3D’s non-toxic proprietary blend of PETG that was designed to serve as an ABS replacement filament for engineering needs. In other words, ABS-R is a very high-end formulation of PETG that exerts its most superior qualities.

    It has increased bonding and lower warp, and does not require a heated print bed, making it a more accessible alternative while still offering the same capabilities of ABS. ABS-R is great for professional engineering where parts need to be machined or have complex overhangs and need to have just a little give.

    Technical Specifications:

    • Guaranteed Filament Length: 250ft / 76.2m
    • Estimated Product Weight: 0.55lb / 250g
    • Filament Diameter: 1.75mm (not chipped, can be used with almost all 3D printers). The 3-letter code printed on the spool will automatically set the correct extrusion temperature in the M3D software for the Micro, Micro+, and the Pro.
    • Shore Hardness: R105
    • Material Density (ISO 1183): 1.27g/cm3
    • Recommended Extrusion Temperature: 215 - 235°C
    • Recommended Heated Print Bed Temperature: 87 - 105°C when used, but it is not required
    • Recommended Build Surfaces: M3D printbed sheet, painter's tape, glue stick, heated bed, hairspray
    • Other Printer Requirements: Part cooling fan

    Pro Tip:

    To prevent clogged nozzles when changing between filaments, we suggest having separate nozzles when using Carbon Fiber and ABS-R lines of filament. Why? Due to the different heat requirements and material properties of these higher-temp, particle-filled filaments, it becomes difficult for softer, lower-temp filaments like PLA and Tough to completely push out Carbon Fiber and ABS-R from the nozzle.

    Продуктови спецификации
    Filament Material PETG
    Filament Diameter 1.75 mm
    Цвят
     
    Тегло 250 g
    Nozzle size ≥ 0.3mm
    Print temp ± 215 - 235° C
    Heat bed ± 87 - 105° C
    Layer height ≥ 0.1mm
    Print speed Medium-Fast
    Fan speed 50-100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Intermediate