Close
(0) Кошница
Няма продукти в кошницата.
Категории
    Filters
    Настройки
    Търси
    Производител: M3D

    PLA 3D INK® White Pearl

    36,00 лв.
    PLA 3D Ink® is polylactic acid, a non-toxic biodegradable thermoplastic and one of the most commonly used 3D printing materials. PLA is a great entry-level filament because it is exceptionally easy to work with. PLA does not require a heated bed, makes very rigid prints, allows for consistent extrusion and bonding, and doesn’t warp much. The ability to produce some of the most accurate, good-looking parts makes it excellent for detailed prototyping. M3D offers PLA in over 29 vibrant colors across various translucency levels.
    *
    *
    Наличност: Please select required attribute(s)

    PLA 3D Ink® is polylactic acid, a non-toxic biodegradable thermoplastic and one of the most commonly used 3D printing materials. PLA is a great entry-level filament because it is exceptionally easy to work with. PLA does not require a heated bed, makes very rigid prints, allows for consistent extrusion and bonding, and doesn’t warp much. The ability to produce some of the most accurate, good-looking parts makes it excellent for detailed prototyping. M3D offers PLA in over 29 vibrant colors across various translucency levels.

    Technical Specifications:

    • Guaranteed Filament Length: 250ft / 76.2m
    • Estimated Product Weight: 0.55lb / 250g
    • Filament Diameter: 1.75mm (not chipped, can be used with almost all 3D printers). The 3-letter code printed on the spool will automatically set the correct extrusion temperature in the M3D software for the Micro, Micro+, and the Pro.
    • Shore Hardness: R70
    • Material Density (ISO 1183): 1.25g/cm3
    • Recommended Extrusion Temperature: 200 - 230°C
    • Recommended Heated Print Bed Temperature: 40 - 50°C when used, but it is not required
    • Recommended Build Surfaces: M3D printbed sheet, painter's tape, glue stick, glass plate
    • Other Printer Requirements: Part cooling fan
    Продуктови спецификации
    Filament Material PLA
    Filament Diameter 1.75 mm
    Цвят
     
    Тегло 250 g
    Nozzle size ≥ 0.3mm
    Print temp ± 200 - 230° C
    Heat bed ± 40 - 50° C
    Layer height ≥ 0.05mm
    Print speed Medium-Fast
    Fan speed 50-100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner
    Напиши отзив
    • Може да оставите отзив за продукт само след като го закупите.
    • Само регистрирани потребители могат да пишат отзиви
    *
    *
    • Лошо
    • Отлично
    *
    *
    *

    PLA 3D Ink® is polylactic acid, a non-toxic biodegradable thermoplastic and one of the most commonly used 3D printing materials. PLA is a great entry-level filament because it is exceptionally easy to work with. PLA does not require a heated bed, makes very rigid prints, allows for consistent extrusion and bonding, and doesn’t warp much. The ability to produce some of the most accurate, good-looking parts makes it excellent for detailed prototyping. M3D offers PLA in over 29 vibrant colors across various translucency levels.

    Technical Specifications:

    • Guaranteed Filament Length: 250ft / 76.2m
    • Estimated Product Weight: 0.55lb / 250g
    • Filament Diameter: 1.75mm (not chipped, can be used with almost all 3D printers). The 3-letter code printed on the spool will automatically set the correct extrusion temperature in the M3D software for the Micro, Micro+, and the Pro.
    • Shore Hardness: R70
    • Material Density (ISO 1183): 1.25g/cm3
    • Recommended Extrusion Temperature: 200 - 230°C
    • Recommended Heated Print Bed Temperature: 40 - 50°C when used, but it is not required
    • Recommended Build Surfaces: M3D printbed sheet, painter's tape, glue stick, glass plate
    • Other Printer Requirements: Part cooling fan
    Продуктови спецификации
    Filament Material PLA
    Filament Diameter 1.75 mm
    Цвят
     
    Тегло 250 g
    Nozzle size ≥ 0.3mm
    Print temp ± 200 - 230° C
    Heat bed ± 40 - 50° C
    Layer height ≥ 0.05mm
    Print speed Medium-Fast
    Fan speed 50-100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner