Close
(0) Кошница
Няма продукти в кошницата.
Категории
    Filters
    Настройки
    Търси
    Производител: M3D

    PLA 3D INK® Deep Shamrock

    36,00 лв.
    PLA 3D Ink® is polylactic acid, a non-toxic biodegradable thermoplastic and one of the most commonly used 3D printing materials. PLA is a great entry-level filament because it is exceptionally easy to work with. PLA does not require a heated bed, makes very rigid prints, allows for consistent extrusion and bonding, and doesn’t warp much. The ability to produce some of the most accurate, good-looking parts makes it excellent for detailed prototyping. M3D offers PLA in over 29 vibrant colors across various translucency levels.
    *
    *
    Наличност: Please select required attribute(s)

    PLA 3D Ink® is polylactic acid, a non-toxic biodegradable thermoplastic and one of the most commonly used 3D printing materials. PLA is a great entry-level filament because it is exceptionally easy to work with. PLA does not require a heated bed, makes very rigid prints, allows for consistent extrusion and bonding, and doesn’t warp much. The ability to produce some of the most accurate, good-looking parts makes it excellent for detailed prototyping. M3D offers PLA in over 29 vibrant colors across various translucency levels.

    Technical Specifications:

    • Guaranteed Filament Length: 250ft / 76.2m
    • Estimated Product Weight: 0.55lb / 250g
    • Filament Diameter: 1.75mm (not chipped, can be used with almost all 3D printers). The 3-letter code printed on the spool will automatically set the correct extrusion temperature in the M3D software for the Micro, Micro+, and the Pro.
    • Shore Hardness: R70
    • Material Density (ISO 1183): 1.25g/cm3
    • Recommended Extrusion Temperature: 200 - 230°C
    • Recommended Heated Print Bed Temperature: 40 - 50°C when used, but it is not required
    • Recommended Build Surfaces: M3D printbed sheet, painter's tape, glue stick, glass plate
    • Other Printer Requirements: Part cooling fan
    Продуктови спецификации
    Filament Material PLA
    Filament Diameter 1.75 mm
    Цвят
     
    Тегло 250 g
    Nozzle size ≥ 0.3mm
    Print temp ± 200 - 230° C
    Heat bed ± 40 - 50° C
    Layer height ≥ 0.05mm
    Print speed Medium-Fast
    Fan speed 50-100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner
    Напиши отзив
    • Може да оставите отзив за продукт само след като го закупите.
    • Само регистрирани потребители могат да пишат отзиви
    *
    *
    • Лошо
    • Отлично
    *
    *
    *

    PLA 3D Ink® is polylactic acid, a non-toxic biodegradable thermoplastic and one of the most commonly used 3D printing materials. PLA is a great entry-level filament because it is exceptionally easy to work with. PLA does not require a heated bed, makes very rigid prints, allows for consistent extrusion and bonding, and doesn’t warp much. The ability to produce some of the most accurate, good-looking parts makes it excellent for detailed prototyping. M3D offers PLA in over 29 vibrant colors across various translucency levels.

    Technical Specifications:

    • Guaranteed Filament Length: 250ft / 76.2m
    • Estimated Product Weight: 0.55lb / 250g
    • Filament Diameter: 1.75mm (not chipped, can be used with almost all 3D printers). The 3-letter code printed on the spool will automatically set the correct extrusion temperature in the M3D software for the Micro, Micro+, and the Pro.
    • Shore Hardness: R70
    • Material Density (ISO 1183): 1.25g/cm3
    • Recommended Extrusion Temperature: 200 - 230°C
    • Recommended Heated Print Bed Temperature: 40 - 50°C when used, but it is not required
    • Recommended Build Surfaces: M3D printbed sheet, painter's tape, glue stick, glass plate
    • Other Printer Requirements: Part cooling fan
    Продуктови спецификации
    Filament Material PLA
    Filament Diameter 1.75 mm
    Цвят
     
    Тегло 250 g
    Nozzle size ≥ 0.3mm
    Print temp ± 200 - 230° C
    Heat bed ± 40 - 50° C
    Layer height ≥ 0.05mm
    Print speed Medium-Fast
    Fan speed 50-100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner
    Потребители купили този продукт, също купиха

    M3D MICRO Green

    720,00 лв.
    The Micro is Designed For Everyone Bring your ideas to life, turn them into businesses, educate, learn, personalize products, make toys, make jewelry, start a curriculum, run a modern workshop, and unleash your creativity. The power of creation is yours!