Close
(0) Кошница
Няма продукти в кошницата.
Категории
    Filters
    Настройки
    Търси
    Производител: ColorFABB

    PLA ECONOMY SILVER

    87,00 лв.
    For quality filament you don't have to compromise. We offer PLA Economy in a few colors, on XL spools only to keep it very affordable. Ideally suited for users who print serious volumes. When in doubt, bet on black. Simple and elegant PLA Economy Black has yet to disappoint.
    *
    *
    Наличност: Please select required attribute(s)

    At colorFabb we have a well-equipped 3d printing studio with many popular 3d printers. Our grade of Economy PLA has been tested using various 3D printers, which has resulted in the following recommended settings.

    Adviced 3d printing temperature:
    195C-220C

    Adviced 3d print speed:
    40 - 100 mm/s

    Advised Heated bed (if you have one, not strictly necessary):
    50-60C

    Cooling fan
    100% fan cooling for best aesthetics, this gives best performance on overhangs and small details. For best mechanical performance try printing with the least amount of cooling needed, for optimal layer adhesion.

    Material:
    Colorfabb PLA Economy

    Diameter Tolerance:
    ± 0.1 mm

    Density:
    1,2-1,3 g/cm3

    Glass Transition Temperature:
    55C

    Продуктови спецификации
    Filament Material PLA
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Тегло 2.2 kg
    Nozzle size ≥ 0.15mm
    Print temp ± 195 - 220° C
    Heat bed ± 50 - 60° C
    Layer height ≥ 0.1mm
    Print speed 40 - 100 mm/s
    Fan speed 50-100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner
    Напиши отзив
    • Може да оставите отзив за продукт само след като го закупите.
    • Само регистрирани потребители могат да пишат отзиви
    *
    *
    • Лошо
    • Отлично
    *
    *
    *

    At colorFabb we have a well-equipped 3d printing studio with many popular 3d printers. Our grade of Economy PLA has been tested using various 3D printers, which has resulted in the following recommended settings.

    Adviced 3d printing temperature:
    195C-220C

    Adviced 3d print speed:
    40 - 100 mm/s

    Advised Heated bed (if you have one, not strictly necessary):
    50-60C

    Cooling fan
    100% fan cooling for best aesthetics, this gives best performance on overhangs and small details. For best mechanical performance try printing with the least amount of cooling needed, for optimal layer adhesion.

    Material:
    Colorfabb PLA Economy

    Diameter Tolerance:
    ± 0.1 mm

    Density:
    1,2-1,3 g/cm3

    Glass Transition Temperature:
    55C

    Продуктови спецификации
    Filament Material PLA
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Тегло 2.2 kg
    Nozzle size ≥ 0.15mm
    Print temp ± 195 - 220° C
    Heat bed ± 50 - 60° C
    Layer height ≥ 0.1mm
    Print speed 40 - 100 mm/s
    Fan speed 50-100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner