Close
(0) Кошница
Няма продукти в кошницата.
Категории
    Filters
    Настройки
    Търси
    Производител: Form Futura

    Premium ABS - Dutch Orange

    58,21 лв.
    Premium ABS is our entry-level no-nonsense ABS filament, which is very impact resistant. Even though Premium ABS might be our entry-level ABS filament, it still outperforms many other ABS type of 3D printer filaments by far when it comes to printer friendliness and reduced warping. Premium ABS has a great thermal stability and flowing behaviour, which is essential for 3D printing.
    *
    *
    Наличност: Please select required attribute(s)
    Premium ABS is our entry-level no-nonsense ABS filament, which is very impact resistant. 
    Even though Premium ABS might be our entry-level ABS filament, it still outperforms many other ABS type of 3D printer filaments by far when it comes to printer friendliness and reduced warping. Premium ABS has a great thermal stability and flowing behaviour, which is essential for 3D printing.
     

    Unique features

    • Great process stability and filament flowing behaviour

    • No-nonsense ABS

    • Easy to post-process

    • Good physical features

     

    General printing guidelines *

    Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104%
    Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm
    Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate

    *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

     

    Filament length

    ρ: 1.03 g/cc 50 gr coil 1 Kg spool 2.3 Kg spool    
    Ø 1.75mm ± 20.2m ± 404m ± 928m    
    Ø 2.85mm ± 7.6m ± 152m ± 350m    

     

    Product export information

    HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

     

    Compliance *

    This filament is compliant to below listed directives and regulations.

    • RoHS directive 2011/65/EC

    • REACH directive 1907/2006/EC 

    *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

    Продуктови спецификации
    Filament Material ABS
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Тегло 1 kg
    Nozzle size ≥ 0.15mm
    Print temp ± 220 - 270° C
    Heat bed ± 90 - 110° C
    Layer height ≥ 0.1mm
    Print speed Medium
    Fan speed 0-25%
    Flow rate ± 104%
    Retraction Yes ± 5 mm
    Experience level Intermediate
    Напиши отзив
    • Може да оставите отзив за продукт само след като го закупите.
    • Само регистрирани потребители могат да пишат отзиви
    *
    *
    • Лошо
    • Отлично
    *
    *
    *
    Premium ABS is our entry-level no-nonsense ABS filament, which is very impact resistant. 
    Even though Premium ABS might be our entry-level ABS filament, it still outperforms many other ABS type of 3D printer filaments by far when it comes to printer friendliness and reduced warping. Premium ABS has a great thermal stability and flowing behaviour, which is essential for 3D printing.
     

    Unique features

    • Great process stability and filament flowing behaviour

    • No-nonsense ABS

    • Easy to post-process

    • Good physical features

     

    General printing guidelines *

    Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104%
    Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm
    Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate

    *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

     

    Filament length

    ρ: 1.03 g/cc 50 gr coil 1 Kg spool 2.3 Kg spool    
    Ø 1.75mm ± 20.2m ± 404m ± 928m    
    Ø 2.85mm ± 7.6m ± 152m ± 350m    

     

    Product export information

    HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

     

    Compliance *

    This filament is compliant to below listed directives and regulations.

    • RoHS directive 2011/65/EC

    • REACH directive 1907/2006/EC 

    *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

    Продуктови спецификации
    Filament Material ABS
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Тегло 1 kg
    Nozzle size ≥ 0.15mm
    Print temp ± 220 - 270° C
    Heat bed ± 90 - 110° C
    Layer height ≥ 0.1mm
    Print speed Medium
    Fan speed 0-25%
    Flow rate ± 104%
    Retraction Yes ± 5 mm
    Experience level Intermediate