Premium ABS is our entry-level no-nonsense ABS filament, which is very impact resistant.
Even though Premium ABS might be our entry-level ABS filament, it still outperforms many other ABS type of 3D printer filaments by far when it comes to printer friendliness and reduced warping. Premium ABS has a great thermal stability and flowing behaviour, which is essential for 3D printing.
Unique features
General printing guidelines *
| Nozzle size: ≥ 0.15mm |
Layer height: ≥ 0.1mm |
Flow rate: ± 104% |
| Print temp: ± 220 - 270° C |
Print speed: Medium |
Retraction: Yes ± 5mm |
| Heat bed: ± 90 - 110° C |
Fan speed: 0-25% |
Experience level: Intermediate |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
Filament length
| ρ: 1.03 g/cc |
50 gr coil |
1 Kg spool |
2.3 Kg spool |
|
|
| Ø 1.75mm |
± 20.2m |
± 404m |
± 928m |
|
|
| Ø 2.85mm |
± 7.6m |
± 152m |
± 350m |
|
|
Product export information
| HS Code: 39169090 |
Description: Monofilament |
Country of origin: the Netherlands |
Compliance *
This filament is compliant to below listed directives and regulations.
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.
