Close
(0) Кошница
Няма продукти в кошницата.
Категории
    Filters
    Настройки
    Търси
    Производител: Form Futura

    ReForm rPET - White

    39,90 лв.
    ReForm rPET is likely to be the most sustainable PETG-based filament on the market. This sustainable PETG filament comes in a wide range of colors and combines strength and toughness with printability.
    *
    *
    Наличност: Please select required attribute(s)

    ReForm is the first filament range that is available on industrial-sized cardboard spools. FormFutura is changing the game for both desktop- and large scale 3D printing. It doesn't matter if you print with 0.25kg sample spools or industrial-sized 4.5 kg spools. You are now assured that your filament comes on a cardboard spool. By that, we strive to keep our (and your) footprint as low as possible. High-end, sustainable and affordable ReForm filament is manufactured in the Netherlands according to ISO 9001:2015 standards. This 3D printing filament is not only friendly for our ecosystem, but also for your budget. Sustainability does not have to come at a higher retail price. ReForm proofs to be high-end, sustainable and also very affordable. Let’s reform additive manufacturing with ReForm by FormFutura! FormFutura rPET filament is made up entirely from recycled post-industrial PETG content sourced from the waste streams that arise during the extrusion or our HDglass filaments. Because of its high recycled content, rPET filament is not made from a virgin natural PETG compound, but from a homogeneous compound made from a wide variety of colors from collected filament extrusion waste. Homogeneous compound runs can vary in color intensity. This may result in lighter or darker 3D printing filament colors extruded from various homogeneous compound runs. On average two to three homogeneous compound runs are made per year. rPET White and Black will always have the same color, as extrusion waste from black and white PETG filament is collected separately.  

    General printing guidelines*

    Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Adhesive: EasyFix Nr. I
    Print temp: ± 230 - 240° C Fan speed: 0 - 30% Experience level: Beginner
    Heat bed: ± 75 - 85° C Enclosure: No / Recommended  

    *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

    Filament length

    ρ: 1.27 g/cc 0.25 Kg spool 1 Kg spool 2.3 Kg spool 3.5 Kg spool 4.5 Kg spool
    Ø 1.75mm ± 82m ± 327m ± 753m ± 1146m ± 1473m
    Ø 2.85mm ± 31m ± 123m ± 284m ± 432m ± 555m

    Dimensions of the cardboard spools

    Weight (filament) Width Outer diameter Inner diameter Weight (empty spool)
    250g - 500g ~40mm ~200mm ~56mm ~130g
    750g ~55mm ~200mm ~56mm ~150g
    1000g ~78mm ~200mm ~56mm ~185g
    2300g ~61mm ~300mm ~56mm ~265g
    3500g ~89mm ~300mm ~56mm ~305g
    4500g ~111mm ~300mm ~56mm ~330g
    Продуктови спецификации
    Filament Material PETG
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Nozzle size ≥ 0.15mm
    Print temp ± 200 - 240° C
    Heat bed ± 65 - 75° C
    Layer height ≥ 0.1mm
    Print speed High
    Fan speed 0-30%
    Flow rate ± 110%
    Retraction Yes ± 6mm
    Experience level Beginner
    Напиши отзив
    • Може да оставите отзив за продукт само след като го закупите.
    • Само регистрирани потребители могат да пишат отзиви
    *
    *
    • Лошо
    • Отлично
    *
    *
    *

    ReForm is the first filament range that is available on industrial-sized cardboard spools. FormFutura is changing the game for both desktop- and large scale 3D printing. It doesn't matter if you print with 0.25kg sample spools or industrial-sized 4.5 kg spools. You are now assured that your filament comes on a cardboard spool. By that, we strive to keep our (and your) footprint as low as possible. High-end, sustainable and affordable ReForm filament is manufactured in the Netherlands according to ISO 9001:2015 standards. This 3D printing filament is not only friendly for our ecosystem, but also for your budget. Sustainability does not have to come at a higher retail price. ReForm proofs to be high-end, sustainable and also very affordable. Let’s reform additive manufacturing with ReForm by FormFutura! FormFutura rPET filament is made up entirely from recycled post-industrial PETG content sourced from the waste streams that arise during the extrusion or our HDglass filaments. Because of its high recycled content, rPET filament is not made from a virgin natural PETG compound, but from a homogeneous compound made from a wide variety of colors from collected filament extrusion waste. Homogeneous compound runs can vary in color intensity. This may result in lighter or darker 3D printing filament colors extruded from various homogeneous compound runs. On average two to three homogeneous compound runs are made per year. rPET White and Black will always have the same color, as extrusion waste from black and white PETG filament is collected separately.  

    General printing guidelines*

    Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Adhesive: EasyFix Nr. I
    Print temp: ± 230 - 240° C Fan speed: 0 - 30% Experience level: Beginner
    Heat bed: ± 75 - 85° C Enclosure: No / Recommended  

    *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

    Filament length

    ρ: 1.27 g/cc 0.25 Kg spool 1 Kg spool 2.3 Kg spool 3.5 Kg spool 4.5 Kg spool
    Ø 1.75mm ± 82m ± 327m ± 753m ± 1146m ± 1473m
    Ø 2.85mm ± 31m ± 123m ± 284m ± 432m ± 555m

    Dimensions of the cardboard spools

    Weight (filament) Width Outer diameter Inner diameter Weight (empty spool)
    250g - 500g ~40mm ~200mm ~56mm ~130g
    750g ~55mm ~200mm ~56mm ~150g
    1000g ~78mm ~200mm ~56mm ~185g
    2300g ~61mm ~300mm ~56mm ~265g
    3500g ~89mm ~300mm ~56mm ~305g
    4500g ~111mm ~300mm ~56mm ~330g
    Продуктови спецификации
    Filament Material PETG
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Nozzle size ≥ 0.15mm
    Print temp ± 200 - 240° C
    Heat bed ± 65 - 75° C
    Layer height ≥ 0.1mm
    Print speed High
    Fan speed 0-30%
    Flow rate ± 110%
    Retraction Yes ± 6mm
    Experience level Beginner