Close
(0) Кошница
Няма продукти в кошницата.
Категории
    Filters
    Настройки
    Търси
    Производител: Form Futura

    ReForm rPLA - Caramel

    20,00 лв.
    ReForm is a sustainable initiative within Formfutura to efficiently manage residual extrusion waste streams and re-use them into high-end upcycled filaments. The ideology behind ReForm is to a make 3D printing more sustainable – without having to make compromises on material properties – and yet keep it affordable.
    *
    *
    Наличност: Please select required attribute(s)
    ReForm is a sustainable initiative within Formfutura to efficiently manage residual extrusion waste streams and re-use them into high-end upcycled filaments. The ideology behind ReForm is to a make 3D printing more sustainable – without having to make compromises on material properties – and yet keep it affordable. 
    ReForm rPLA is based on exactly the same unique formulation as our EasyFil PLA range, but is made out of residual extrusion waste streams which are re-compounded and homogenized into a high-end and easy to print upcycled PLA filament with significant less environmental impact.

     

    Unique features

    • 100% upcycled/recycled filament with retaining the unique easy-to-print characteristics of EasyFil PLA

      • Less environmental impact by quality controlling and re-using extrusion waste streams

      • Only residual waste streams of EasyFil PLA is being re-used, thus pure quality!

    • Sustainable packaging

      • ReForm filaments are spooled on easy to recycle and dispose recycled cardboard spools

      • ReForm filament is packaged in recycled carton boxes

    • Biodegradable

    • Very easy to print

      • Warp-free printing and no deformation after cooling

      • Improved flowing behaviour and inter-layer adhesion

      • Good first layer adhesion to several (un)heated print surfaces

     

    General printing guidelines *

    Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100%
    Print temp: ± 200 - 230° C Print speed: Medium Retraction: Yes ± 5mm
    Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner

    *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

     

    Filament length

    ρ: 1.24 g/cc 50 gr coil 1 Kg spool      
    Ø 1.75mm ± 16.8m ± 335m      
    Ø 2.85mm ± 6.3m ± 126m      

     

    Product export information

    HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

     

    Compliance *

    This filament is compliant to below listed directives and regulations.

    • RoHS directive 2011/65/EC

    • REACH directive 1907/2006/EC 

    *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

     

    Продуктови спецификации
    Filament Material PLA
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Nozzle size ≥ 0.15mm
    Print temp ± 200 - 230° C
    Heat bed ± 0 - 60° C
    Layer height ≥ 0.1mm
    Print speed Medium
    Fan speed 50-100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner
    Напиши отзив
    • Може да оставите отзив за продукт само след като го закупите.
    • Само регистрирани потребители могат да пишат отзиви
    *
    *
    • Лошо
    • Отлично
    *
    *
    *
    ReForm is a sustainable initiative within Formfutura to efficiently manage residual extrusion waste streams and re-use them into high-end upcycled filaments. The ideology behind ReForm is to a make 3D printing more sustainable – without having to make compromises on material properties – and yet keep it affordable. 
    ReForm rPLA is based on exactly the same unique formulation as our EasyFil PLA range, but is made out of residual extrusion waste streams which are re-compounded and homogenized into a high-end and easy to print upcycled PLA filament with significant less environmental impact.

     

    Unique features

    • 100% upcycled/recycled filament with retaining the unique easy-to-print characteristics of EasyFil PLA

      • Less environmental impact by quality controlling and re-using extrusion waste streams

      • Only residual waste streams of EasyFil PLA is being re-used, thus pure quality!

    • Sustainable packaging

      • ReForm filaments are spooled on easy to recycle and dispose recycled cardboard spools

      • ReForm filament is packaged in recycled carton boxes

    • Biodegradable

    • Very easy to print

      • Warp-free printing and no deformation after cooling

      • Improved flowing behaviour and inter-layer adhesion

      • Good first layer adhesion to several (un)heated print surfaces

     

    General printing guidelines *

    Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100%
    Print temp: ± 200 - 230° C Print speed: Medium Retraction: Yes ± 5mm
    Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner

    *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

     

    Filament length

    ρ: 1.24 g/cc 50 gr coil 1 Kg spool      
    Ø 1.75mm ± 16.8m ± 335m      
    Ø 2.85mm ± 6.3m ± 126m      

     

    Product export information

    HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

     

    Compliance *

    This filament is compliant to below listed directives and regulations.

    • RoHS directive 2011/65/EC

    • REACH directive 1907/2006/EC 

    *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

     

    Продуктови спецификации
    Filament Material PLA
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Nozzle size ≥ 0.15mm
    Print temp ± 200 - 230° C
    Heat bed ± 0 - 60° C
    Layer height ≥ 0.1mm
    Print speed Medium
    Fan speed 50-100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner