Close
(0) Кошница
Няма продукти в кошницата.
Категории
    Filters
    Настройки
    Търси
    Производител: M3D

    Tough 3D Ink Super Blue

    42,00 лв.
    Tough 3D Ink® is a proprietary non-toxic thermoplastic blend made exclusively by M3D. Tough offers unprecedented utility for 3D printing due to its strength and controlled amount of flexibility. When compared to traditional filaments which have a fraction of the bond strength and are typically brittle when printed, Tough 3D Ink is bonded at full strength, allowing you to print longer-lasting objects. Tough is great for medium and large models that need to hold up in the real world or need lots of give.
    *
    *
    Наличност: Please select required attribute(s)

    Tough 3D Ink® is a proprietary non-toxic thermoplastic blend made exclusively by M3D. Tough offers unprecedented utility for 3D printing due to its strength and controlled amount of flexibility. When compared to traditional filaments which have a fraction of the bond strength and are typically brittle when printed, Tough 3D Ink is bonded at full strength, allowing you to print longer-lasting objects. Tough is great for medium and large models that need to hold up in the real world or need lots of give. 

    Tough is M3D’s most popular filament material to date! It tends to sell out very quickly, so be sure to buy now to reserve your favorite colors.

    Technical Specifications:

    • Guaranteed Filament Length: 250ft / 76.2m
    • Estimated Product Weight: 0.55lb / 250g
    • Filament Diameter: 1.75mm (not chipped, can be used with almost all 3D printers). The 3-letter code printed on the spool will automatically set the correct extrusion temperature in the M3D software for the Micro, Micro+, and the Pro.
    • Shore Hardness: 90A
    • Material Density (ISO 1183): 1.19g/cm3
    • Recommended Extrusion Temperature: 220 - 240°C
    • Recommended Heated Print Bed Temperature: 45 - 60°C when used, but it is not required
    • Recommended Build Surfaces: M3D printbed sheet, painter's tape, glue stick, glass plate, PEI
    • Other Printer Requirements: Part cooling fan

    Pro Tip:

    FEED EXTERNALLY

    When using Tough, manually calibrate the nozzle 0.3mm higher at all corners and in the center. This will help prevent the first layer from being scraped as the second layer is applied.

    Продуктови спецификации
    Filament Material TPU
    Filament Diameter 1.75 mm
    Цвят
     
    Тегло 250 g
    Nozzle size ≥ 0.3mm
    Print temp ± 220 - 240° C
    Heat bed ± 45 - 60° C
    Layer height ≥ 0.1mm
    Print speed Medium-Fast
    Fan speed 50-100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Intermediate
    Напиши отзив
    • Може да оставите отзив за продукт само след като го закупите.
    • Само регистрирани потребители могат да пишат отзиви
    *
    *
    • Лошо
    • Отлично
    *
    *
    *

    Tough 3D Ink® is a proprietary non-toxic thermoplastic blend made exclusively by M3D. Tough offers unprecedented utility for 3D printing due to its strength and controlled amount of flexibility. When compared to traditional filaments which have a fraction of the bond strength and are typically brittle when printed, Tough 3D Ink is bonded at full strength, allowing you to print longer-lasting objects. Tough is great for medium and large models that need to hold up in the real world or need lots of give. 

    Tough is M3D’s most popular filament material to date! It tends to sell out very quickly, so be sure to buy now to reserve your favorite colors.

    Technical Specifications:

    • Guaranteed Filament Length: 250ft / 76.2m
    • Estimated Product Weight: 0.55lb / 250g
    • Filament Diameter: 1.75mm (not chipped, can be used with almost all 3D printers). The 3-letter code printed on the spool will automatically set the correct extrusion temperature in the M3D software for the Micro, Micro+, and the Pro.
    • Shore Hardness: 90A
    • Material Density (ISO 1183): 1.19g/cm3
    • Recommended Extrusion Temperature: 220 - 240°C
    • Recommended Heated Print Bed Temperature: 45 - 60°C when used, but it is not required
    • Recommended Build Surfaces: M3D printbed sheet, painter's tape, glue stick, glass plate, PEI
    • Other Printer Requirements: Part cooling fan

    Pro Tip:

    FEED EXTERNALLY

    When using Tough, manually calibrate the nozzle 0.3mm higher at all corners and in the center. This will help prevent the first layer from being scraped as the second layer is applied.

    Продуктови спецификации
    Filament Material TPU
    Filament Diameter 1.75 mm
    Цвят
     
    Тегло 250 g
    Nozzle size ≥ 0.3mm
    Print temp ± 220 - 240° C
    Heat bed ± 45 - 60° C
    Layer height ≥ 0.1mm
    Print speed Medium-Fast
    Fan speed 50-100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Intermediate