Close
(0) Кошница
Няма продукти в кошницата.
Категории
    Filters
    Настройки
    Търси
    Производител: ColorFABB

    TOUGH PLA BLACK

    105,72 лв.
    If you like the printability of PLA but are looking for a significant increase in toughness and lower stiffness then our Tough PLA will be a good candidate. The material can be processed at slightly higher temperature then regular PLA, but still offers easy printing and no warping of bottom layers.
    *
    *
    Наличност: Please select required attribute(s)

    If you like the printability of PLA but are looking for a significant increase in toughness and lower stiffness then our Tough PLA will be a good candidate.

    The material can be processed at slightly higher temperature then regular PLA, but still offers easy printing and no warping of bottom layers.

    At colorFabb we have a well-equipped 3d printing studio with many popular 3d printers. Our grade of Economy PLA has been tested using various 3D printers, which has resulted in the following recommended settings.

    Adviced 3d printing temperature:
    210C-230C

    Adviced 3d print speed:
    40-50 mm/s

    Advised Heated bed (if you have one, not strictly necessary):
    50-60C

    Cooling fan
    Use the least amount of cooling for best layer-to-layer adhesion. For better overhang performance use 50-100% cooling.

    Material:
    Colorfabb Tough PLA

    Diameter Tolerance:
    ± 0.1 mm

    Density:
    1,2-1,3 g/cm3

    Glass Transition Temperature:
    55C

    Продуктови спецификации
    Filament Material PLA
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Тегло 750 g
    Nozzle size ≥ 0.15mm
    Print temp ± 210 - 230° C
    Heat bed ± 50 - 60° C
    Layer height ≥ 0.1mm
    Print speed 40 - 50 mm/s
    Fan speed 50-100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner
    Напиши отзив
    • Може да оставите отзив за продукт само след като го закупите.
    • Само регистрирани потребители могат да пишат отзиви
    *
    *
    • Лошо
    • Отлично
    *
    *
    *

    If you like the printability of PLA but are looking for a significant increase in toughness and lower stiffness then our Tough PLA will be a good candidate.

    The material can be processed at slightly higher temperature then regular PLA, but still offers easy printing and no warping of bottom layers.

    At colorFabb we have a well-equipped 3d printing studio with many popular 3d printers. Our grade of Economy PLA has been tested using various 3D printers, which has resulted in the following recommended settings.

    Adviced 3d printing temperature:
    210C-230C

    Adviced 3d print speed:
    40-50 mm/s

    Advised Heated bed (if you have one, not strictly necessary):
    50-60C

    Cooling fan
    Use the least amount of cooling for best layer-to-layer adhesion. For better overhang performance use 50-100% cooling.

    Material:
    Colorfabb Tough PLA

    Diameter Tolerance:
    ± 0.1 mm

    Density:
    1,2-1,3 g/cm3

    Glass Transition Temperature:
    55C

    Продуктови спецификации
    Filament Material PLA
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Тегло 750 g
    Nozzle size ≥ 0.15mm
    Print temp ± 210 - 230° C
    Heat bed ± 50 - 60° C
    Layer height ≥ 0.1mm
    Print speed 40 - 50 mm/s
    Fan speed 50-100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner