Close
(0) Кошница
Няма продукти в кошницата.
Категории
    Filters
    Настройки
    Търси
    Производител: ColorFABB

    Wine red RAL 3005

    117,48 лв.
    A premium PLA filament, made in the color you want, on demand. Your product will be made within 5-8 business days, other stock products ordered will be shipped once the order is complete. The color chart is used by colorFabb as a reference. We advise users to do the same when choosing a specific color. Our product images have been carefully made using the same lighting conditions and no post processing. However every screen will produce a slightly different color representation, therefor we do not recommend to base your choice on our product images alone.
    *
    *
    Наличност: Please select required attribute(s)

    A premium PLA filament, made in the color you want, on demand. Your product will be made within 5-8 business days, other stock products ordered will be shipped once the order is complete.

    The color chart is used by colorFabb as a reference. We advise users to do the same when choosing a specific color. Our product images have been carefully made using the same lighting conditions and no post processing. However every screen will produce a slightly different color representation, therefor we do not recommend to base your choice on our product images alone.

    At colorFabb we have a well-equipped 3d printing studio with many popular 3d printers. Our Color On Demand PLA has been tested using various 3D printers, which has resulted in the following recommended settings.

     

    Adviced 3d printing temperature:
    195C-220C

    Adviced 3d print speed:
    40 - 100 mm/s

    Advised Heated bed (if you have one, not strictly necessary):
    50-60C

    Cooling fan
    100% fan cooling for best aesthetics, this gives best performance on overhangs and small details. For best mechanical performance try printing with the least amount of cooling needed, for optimal layer adhesion.

    Material:
    Colorfabb Color On Demand

    Diameter Tolerance:
    ± 0.1 mm

    Density:
    1,2-1,3 g/cm3

    Glass Transition Temperature:
    55C



    Продуктови спецификации
    Filament Material PLA
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Тегло 750 g
    Nozzle size ≥ 0.15mm
    Print temp ± 195 - 220° C
    Heat bed ± 50 - 60° C
    Layer height ≥ 0.1mm
    Print speed 40 - 100 mm/s
    Fan speed 100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner
    Напиши отзив
    • Може да оставите отзив за продукт само след като го закупите.
    • Само регистрирани потребители могат да пишат отзиви
    *
    *
    • Лошо
    • Отлично
    *
    *
    *

    A premium PLA filament, made in the color you want, on demand. Your product will be made within 5-8 business days, other stock products ordered will be shipped once the order is complete.

    The color chart is used by colorFabb as a reference. We advise users to do the same when choosing a specific color. Our product images have been carefully made using the same lighting conditions and no post processing. However every screen will produce a slightly different color representation, therefor we do not recommend to base your choice on our product images alone.

    At colorFabb we have a well-equipped 3d printing studio with many popular 3d printers. Our Color On Demand PLA has been tested using various 3D printers, which has resulted in the following recommended settings.

     

    Adviced 3d printing temperature:
    195C-220C

    Adviced 3d print speed:
    40 - 100 mm/s

    Advised Heated bed (if you have one, not strictly necessary):
    50-60C

    Cooling fan
    100% fan cooling for best aesthetics, this gives best performance on overhangs and small details. For best mechanical performance try printing with the least amount of cooling needed, for optimal layer adhesion.

    Material:
    Colorfabb Color On Demand

    Diameter Tolerance:
    ± 0.1 mm

    Density:
    1,2-1,3 g/cm3

    Glass Transition Temperature:
    55C



    Продуктови спецификации
    Filament Material PLA
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Тегло 750 g
    Nozzle size ≥ 0.15mm
    Print temp ± 195 - 220° C
    Heat bed ± 50 - 60° C
    Layer height ≥ 0.1mm
    Print speed 40 - 100 mm/s
    Fan speed 100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner