Close
(0) Кошница
Няма продукти в кошницата.
Категории
    Filters
    Настройки
    Търси
    Производител: BigRep GmbH

    Berliner Weisse Rot

    165,49 лв.
    Spark your creativity! Extend the scope of your printed part applications with our outstanding PETG filaments, while keeping them as strong and aesthetically pleasing as possible. When it comes to projects with higher requirements in terms of strength, toughness and thermal resistance, PETG is the material of choice. It’s very low warping behaviour makes it a real alternative to ABS!
    *
    *
    Наличност: Please select required attribute(s)

    Specifications

    PHYSICAL PROPERTIES

    Material: Polyethylene Terephthalate with Glycol
    Filament Sizes: 2.3, 4.5, and 8.0 kg
    Diameter: 2.85 mm
    Density: 1.27 g/cm³
    Flexural Modulus (178): 2145 MPa
    Tensile Strength (ISO 527): 50 MPa
    Impact Strength Notched: 7,2 KJ/m²
    Heat Resistance HDT / B (ISO 75): 60 °C
    Hardness (Shore): D 78

    RECOMMENDED PRINTING CONDITIONS

    Nozzle Temperature 205 – 220 °C
    Print Bed Temperature 80 °C
    Environmental Temperature n.s. °C
    Printing Speed >40 mm/s

    Продуктови спецификации
    Filament Material PETG
    Filament Diameter 2.85 mm
    Цвят
     
    Тегло 2.3 kg
    Nozzle size ≥ 0.15mm
    Print temp ± 205 - 220° C
    Heat bed 80° C
    Layer height ≥ 0.1mm
    Print speed Medium
    Fan speed 50-100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner
    Напиши отзив
    • Може да оставите отзив за продукт само след като го закупите.
    • Само регистрирани потребители могат да пишат отзиви
    *
    *
    • Лошо
    • Отлично
    *
    *
    *

    Specifications

    PHYSICAL PROPERTIES

    Material: Polyethylene Terephthalate with Glycol
    Filament Sizes: 2.3, 4.5, and 8.0 kg
    Diameter: 2.85 mm
    Density: 1.27 g/cm³
    Flexural Modulus (178): 2145 MPa
    Tensile Strength (ISO 527): 50 MPa
    Impact Strength Notched: 7,2 KJ/m²
    Heat Resistance HDT / B (ISO 75): 60 °C
    Hardness (Shore): D 78

    RECOMMENDED PRINTING CONDITIONS

    Nozzle Temperature 205 – 220 °C
    Print Bed Temperature 80 °C
    Environmental Temperature n.s. °C
    Printing Speed >40 mm/s

    Продуктови спецификации
    Filament Material PETG
    Filament Diameter 2.85 mm
    Цвят
     
    Тегло 2.3 kg
    Nozzle size ≥ 0.15mm
    Print temp ± 205 - 220° C
    Heat bed 80° C
    Layer height ≥ 0.1mm
    Print speed Medium
    Fan speed 50-100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner