Close
(0) Кошница
Няма продукти в кошницата.
Категории
    Filters
    Настройки
    Търси
    Производител: ColorFABB

    VARIOSHORE TPU NATURAL

    117,48 лв.
    varioShore TPU allows users to vary the density of the material by adjusting temperature and material throughput (speed & layerheight). The base TPU is a 92A material, which will work with most standard extruder set-ups for both Bowden and direct drive systems.
    *
    *
    Наличност: Please select required attribute(s)

    varioShore TPU allows users to vary the density of the material by adjusting temperature and material throughput (speed & layerheight). At temperatures between 200 and 250C the materials will start to expand to roughly 1.4-1.6 times its original volume. This means the material can be printed at low flow rates (60-70%), to compensate the active foaming, which in return gives very soft printed parts. Between 190-200C the material can be printed without foaming, resulting in different haptics and harder prints compared to foamed samples.

    The base TPU is a 92A material, which will work with most standard extruder set-ups for both Bowden and direct drive systems.

    We advise our community to use standard TPU settings as a base setting for developing your own pre-sets. Make sure the distance between nozzle and platform is not to small, especially if the material is being foamed while printing, the pressure will need to be released from the hot-end to prevent clogging and feeder issues.

    varioShore TPU - Natural

    1. Variable shorehardness
    2. Active foaming technology
    3. Reduced weight / density
    4. Soft touch surface
    Продуктови спецификации
    Filament Material TPU
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Тегло 700 g
    Nozzle size ≥ 0.15mm
    Print temp ± 220 - 230° C
    Heat bed ± 100 - 120° C *
    Layer height ≥ 0.1mm
    Print speed 45-60 mm/ sec
    Fan speed 100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner
    Напиши отзив
    • Може да оставите отзив за продукт само след като го закупите.
    • Само регистрирани потребители могат да пишат отзиви
    *
    *
    • Лошо
    • Отлично
    *
    *
    *

    varioShore TPU allows users to vary the density of the material by adjusting temperature and material throughput (speed & layerheight). At temperatures between 200 and 250C the materials will start to expand to roughly 1.4-1.6 times its original volume. This means the material can be printed at low flow rates (60-70%), to compensate the active foaming, which in return gives very soft printed parts. Between 190-200C the material can be printed without foaming, resulting in different haptics and harder prints compared to foamed samples.

    The base TPU is a 92A material, which will work with most standard extruder set-ups for both Bowden and direct drive systems.

    We advise our community to use standard TPU settings as a base setting for developing your own pre-sets. Make sure the distance between nozzle and platform is not to small, especially if the material is being foamed while printing, the pressure will need to be released from the hot-end to prevent clogging and feeder issues.

    varioShore TPU - Natural

    1. Variable shorehardness
    2. Active foaming technology
    3. Reduced weight / density
    4. Soft touch surface
    Продуктови спецификации
    Filament Material TPU
    Filament Diameter 1.75/2.85 mm
    Цвят
     
    Тегло 700 g
    Nozzle size ≥ 0.15mm
    Print temp ± 220 - 230° C
    Heat bed ± 100 - 120° C *
    Layer height ≥ 0.1mm
    Print speed 45-60 mm/ sec
    Fan speed 100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner