This is the natural material, no additives. When printed with proper flow and temperature good transparency can be obtained.
At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using colorFabb 3d printing filament.
Adviced 3d printing temperature:
250-280C
Adviced 3d print speed:
30 - 50 mm/s
Advised Heated bed
100-120C
Build platform
colorFabb_HT gives best results on a heated build platform, 100C to about 120C is usually needed for proper adhesion to a glass plate. When this is not enough it’s possible to use buildTak plate for stronger adhesion
Since colorFabb develops and produces their own filaments we have a lot of knowhow about our materials. Here you’ll find all kinds of interesting material specifications that will help you decide which material is best for your project.
Material:
colorFabb_HT CO-POLYESTER
colorFabb_HT is enabled by Eastman Tritan™ copolyester technology
Diameter Tolerance:
± 0.1 mm
Density:
1.18 g/cm3
Glass Transition Temperature:
100C
