Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search

    3D Resins

    View as Grid List
    Sort by
    Display per page

    Easy Cast 2.0 C

    850,00 лв.
    Castable • High Speed • Jewelry Easy Cast 2.0 C is a breakthrough material for the high-speed printing of a castable models. Easy Cast 2.0 C is a photopolymer with the highest wax content available in 3D printing today. Easy Cast 2.0 C was developed for printing exclusively on EnvisionTEC’s patented cDLM printers. Because cDLM technology has almost zero separation forces during printing, it allows for 90% liquid wax content in the formulation. Consequently, patterns printed in Easy Cast 2.0 C feature burnout similar to injection wax. What’s more, because of the addition of special hardeners, Easy Cast 2.0 C still delivers exceptional crisp features, similar to EnvisionTEC’s low- and no-wax materials — from the smallest of pierced filigrees to the sharpest of corners on raised surfaces. Easy Cast 2.0 C, launched in 2017, sets a new standard in castable 3D printed materials.

    EC 3000

    700,00 лв.
    Castable • Jewelry EC3000 has been a popular material in EnvisionTEC’s Easy Cast or “EC” material lineup for more than a decade. Our EC materials are known for higher wax content, less thermal expansion during burnout and foolproof casting. With a 55% wax content material, including both liquid and and powder wax, EC3000 is the highest wax material EnvisionTEC offers for printing on its non-continuous DLP printers. Any higher wax content requires printing on cDLM technology with Easy Cast 2.0 C. EC3000 delivers exceptionally crisp detail and a smooth surface finish, along with the clean burnout that delivers foolproof casting with standard investments.

    EC500

    850,00 лв.
    CASTABLE • JEWELRY EC500 is part of EnvisionTEC’s Easy Cast or “EC” material lineup, and is recommended for heavier jewelry pieces up to 20 grams finish weight. Our EC materials are known for higher wax content, less thermal expansion during burnout and foolproof casting. With 20% wax content, EC500 is the highest resolution and crispest lost wax casting material without sacrificing the speed of higher plastic materials. EC500 can be used on EnvisionTEC’s DLP desktop and Perfactory printers. EC500 has a melting point of 250 degrees C, and zero ash content on complete burnout, which allows for easy casting.

    E-OrthoShape

    360,00 лв.
    E-OrthoShape is a grey ABS-like material that prints in 100 micron layers. It is recommended for the affordable volume production of models on which to produce clear thermoformed aligners by orthodontic professionals.

    E-Partial

    1 080,00 лв.
    Castable • Dental A castable material developed for a specific need in the dental industry: delivering delicate partial frameworks with thin features and some flexibility for casting. E-Partial material maintains flexural strength to ensure clasp flex without breakage. The stiffness of E-Partial allows for production of a very hard retention grid and super tight thin clasps to deliver a metal partial with the perfect fit every time. Importantly, E-Partial can be printed at a 25 micron resolution in the Z axis, for extreme accuracy.

    EPIC

    780,00 лв.
    Castable • Jewelry EPIC is an Exceptional Plastic Investment Casting material. It is highly recommended for special order retail and other jewelry customers who require flexibility between large and small pieces and have expert-level quality control in casting. A low-wax 3D printing material, containing 8% liquid wax, EPIC delivers results similar to EnvisionTEC’s wax-free PIC material: stiff and crisp details with outstanding surface finish. While PIC is recommended for delicate pieces up to 5 grams finish weight, such as jewelry pieces, the additional wax gives EPIC additional flexibility up to 12 grams of finish weight. EnvisionTEC recommends casting EPIC with Ransom & Randolph’s PlastiCast PT or other extra-high-strength investments.

    E-SepFree

    800,00 лв.
    Dental EnvisionTEC’s revolutionary new E-SepFree is the only 3D printable dental model material that fulfills two special needs in the dental industry that haven’t previously been possible with 3D printed models.

    FormCast

    710,00 лв.
    CASTABLE • PROTOTYPING • MANUFACTURING Currently in beta testing with key customers, FormCast Powered by Somos is a dual use material that can be printed on EnvisionTEC’s large-frame 3SP machines, delivering a best-in-class accuracy and surface finish for exceptional large castings.

    NextDent C&B MFH

    1 060,00 лв.
    Dental NextDent C&B MFH printing material is a biocompatible Class IIa and FDA-approved solution for the accurate 3D printing of crowns and bridges. C&B MFH can also be used for the 3D printing of very tough veneers that are extremely accurate and have a very fine surface finish as well as denture try-ins. The balance between inorganic fillers and the resin give the material its high strength and wear resistance.

    NextDent Denture 3D+

    710,00 лв.
    Dental NextDent Denture 3D+ material is an FDA-approved, biocompatible Class IIa material suitable for printing all types of denture bases. This material has low shrinkage compared to standard PMMA denture base materials, which results in excellent fitting denture bases. This 3D-printed solution allows for a natural looking appliance with exceptional customized fit.

    NextDent Tray

    360,00 лв.
    Dental NextDent Tray is a 3D printing material for use in producing individual customized impression trays. Dental impressions can be used for preliminary impressions, final impressions, and bite registrations and are used for prosthodontics, orthodontics, dental crowns and bridges, maxillofacial prosthetics, oral and maxillofacial surgery, in diagnosis, mouth guards, whitening trays, and for the permanent dental record to document before and after phases.

    PIC 100 Series

    340,00 лв.
    Castable • Jewelry • Dental • High Speed • Manufacturing One of the most popular production casting materials in the EnvisionTEC portfolio, PIC 100 Series is the company’s original Plastic Investment Casting (PIC) material with no wax content. Three times harder than carving wax, PIC 100 delivers stiff parts with crisp detail and exceptional surface finish, including thin walls and intricate details. PIC 100 is ideal for parts up to 5 grams finish weight, such as bridal jewelry.

    Press E Cast

    1 240,00 лв.
    Castable • High Speed • Jewelry Easy Cast 2.0 C is a breakthrough material for the high-speed printing of a castable models. Easy Cast 2.0 C is a photopolymer with the highest wax content available in 3D printing today. Easy Cast 2.0 C was developed for printing exclusively on EnvisionTEC’s patented cDLM printers. Because cDLM technology has almost zero separation forces during printing, it allows for 90% liquid wax content in the formulation. Consequently, patterns printed in Easy Cast 2.0 C feature burnout similar to injection wax. What’s more, because of the addition of special hardeners, Easy Cast 2.0 C still delivers exceptional crisp features, similar to EnvisionTEC’s low- and no-wax materials — from the smallest of pierced filigrees to the sharpest of corners on raised surfaces. Easy Cast 2.0 C, launched in 2017, sets a new standard in castable 3D printed materials.

    WIC100

    800,00 лв.
    Castable • Jewelry With 20% powder wax content, WIC100 Series remains a popular value material in EnvisionTEC’s portfolio of castable materials. WIC100 delivers quality detail and printing speeds, along with a standard wax burn-out cycle with regular gypsum investment. During the burn-out cycle, the nano-wax melts away first allowing the resin to burn off without excessive expansion.

    3D Resins

    Filter by:

    Clear All