The Micro is Designed For Everyone Bring your ideas to life, turn them into businesses, educate, learn, personalize products, make toys, make jewelry, start a curriculum, run a modern workshop, and unleash your creativity. The power of creation is yours!

Tough 3D Ink® is a proprietary non-toxic thermoplastic blend made exclusively by M3D. Tough offers unprecedented utility for 3D printing due to its strength and controlled amount of flexibility. When compared to traditional filaments which have a fraction of the bond strength and are typically brittle when printed, Tough 3D Ink is bonded at full strength, allowing you to print longer-lasting objects. Tough is great for medium and large models that need to hold up in the real world or need lots of give.

TitanX is an industrial-grade, high-performance and FFF/FDM-optimized ABS based engineering filament. TitanX is the evolution of ABS into a warp-free filament with unsurpassed mechanical properties and is extremely suitable for 3D printing large scale and high precision engineering objects. TitanX is truly FFF/FDM-optimized as it has zero warping, a perfect interlayer adhesion and can be printed directly on a heated glass plate without any adhesives or tapes to be used.

PLA 3D Ink® is polylactic acid, a non-toxic biodegradable thermoplastic and one of the most commonly used 3D printing materials. PLA is a great entry-level filament because it is exceptionally easy to work with. PLA does not require a heated bed, makes very rigid prints, allows for consistent extrusion and bonding, and doesn’t warp much. The ability to produce some of the most accurate, good-looking parts makes it excellent for detailed prototyping. M3D offers PLA in over 29 vibrant colors across various translucency levels.

EasyCork is a lightweight cork-filled PLA-based filament which is gravimetrically filled with approximately 30% cork fibres. The gravimetric filling with relatively lightweight cork fibres means that EasyCork has extremely high volumetric cork filling properties, allowing you to 3D print beautiful objects with great cork-like aesthetics and cork-like properties such as being lightweight and impact resistant. EasyCork is a very easy to print material as it is based on our EasyFil PLA compound and the 30% gravimetrical filling with cork fibres make the filament absolutely warp-free.

StoneFil is a PLA-based filament which is based on our modified and easy-to-print EasyFil PLA compound and is gravimetrically filled with 50% of powdered stone. This high “stone filling” has resulted in a 3D printer filament with remarkable aesthetic features and a significant higher material density up to 37% higher than “normal” PLA. StoneFil is an easy-to-print 3D printer filament and printed objects have an extremely matte stone-like finish with unique natural gradient colour linings resulting in an exceptional chromatic spectrum per print. Every StoneFil printed object will have its own identity and unique gradient colour shading.

EasyWood is a wood-filled PLA-based filament which is gravimetrically filled with approximately 40% grinded wood particles. EasyWood is a very easy to print wood filament as it is based on our EasyFil PLA compound and the 40% gravimetrical filling with grinded wood particles make the filament absolutely warp-free. EasyWood looks, feels and smells like real wood and beautiful wood-nerve structures can be obtained by grinding the printed object a bit with a piece of fine grit sandpaper or by varying with the printing temperature.

EasyWood is a wood-filled PLA-based filament which is gravimetrically filled with approximately 40% grinded wood particles. EasyWood is a very easy to print wood filament as it is based on our EasyFil PLA compound and the 40% gravimetrical filling with grinded wood particles make the filament absolutely warp-free. EasyWood looks, feels and smells like real wood and beautiful wood-nerve structures can be obtained by grinding the printed object a bit with a piece of fine grit sandpaper or by varying with the printing temperature.