Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search
    Manufacturer: ColorFABB

    HT WHITE

    105,72 лв.
    This is not an off-white color, but the most intense white we could achieve.
    *
    *
    Availability: Please select required attribute(s)
    This is not an off-white color, but the most intense white we could achieve.

    At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using colorFabb 3d printing filament.

     

    Adviced 3d printing temperature:
    250-280C

    Adviced 3d print speed:
    30 - 50 mm/s

    Advised Heated bed
    100-120C

    Build platform
    colorFabb_HT gives best results on a heated build platform, 100C to about 120C is usually needed for proper adhesion to a glass plate. When this is not enough it’s possible to use buildTak plate for stronger adhesion

     

    Since colorFabb develops and produces their own filaments we have a lot of knowhow about our materials. Here you’ll find all kinds of interesting material specifications that will help you decide which material is best for your project.

     

    Material: 

    colorFabb_HT CO-POLYESTER 
    colorFabb_HT is enabled by Eastman Tritan™ copolyester technology

     

    Diameter Tolerance:
    ± 0.1 mm

     

    Density: 
    1.18 g/cm3

     

    Glass Transition Temperature:
    100C

    Products specifications
    Filament Material CO-Polyester
    Filament Diameter 1.75/2.85 mm
    Color
     
    Weight 700 g
    Nozzle size ≥ 0.15mm
    Print temp ± 250 - 280° C *
    Heat bed ± 100 - 120° C *
    Layer height ≥ 0.1mm
    Print speed 30 - 50 mm/s
    Fan speed 50-100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent
    *
    *
    *
    This is not an off-white color, but the most intense white we could achieve.

    At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using colorFabb 3d printing filament.

     

    Adviced 3d printing temperature:
    250-280C

    Adviced 3d print speed:
    30 - 50 mm/s

    Advised Heated bed
    100-120C

    Build platform
    colorFabb_HT gives best results on a heated build platform, 100C to about 120C is usually needed for proper adhesion to a glass plate. When this is not enough it’s possible to use buildTak plate for stronger adhesion

     

    Since colorFabb develops and produces their own filaments we have a lot of knowhow about our materials. Here you’ll find all kinds of interesting material specifications that will help you decide which material is best for your project.

     

    Material: 

    colorFabb_HT CO-POLYESTER 
    colorFabb_HT is enabled by Eastman Tritan™ copolyester technology

     

    Diameter Tolerance:
    ± 0.1 mm

     

    Density: 
    1.18 g/cm3

     

    Glass Transition Temperature:
    100C

    Products specifications
    Filament Material CO-Polyester
    Filament Diameter 1.75/2.85 mm
    Color
     
    Weight 700 g
    Nozzle size ≥ 0.15mm
    Print temp ± 250 - 280° C *
    Heat bed ± 100 - 120° C *
    Layer height ≥ 0.1mm
    Print speed 30 - 50 mm/s
    Fan speed 50-100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner