Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search
    Manufacturer: Form Futura

    Python Flex TPU 90A - Clear

    74,40 лв.
    Python Flex TPU 90A is a very flexible type of 3D printer filament with a shore hardness of 90A and is perfect for 3D printing strong and resilient parts that require both flexibility and elasticity.
    *
    *
    Availability: Please select required attribute(s)

    Python Flex TPU 90A is an easy to print flexible filament. With a shore hardness of 90A, this filament is much softer than our Python Flex TPU 98A. Python Flex TPU 90A shows good adhesion to the print bed and has perfect inter-layer adhesion.

    This industrial-grade TPU is designed for mechanical applications whereby resistance to wear, tear and abrasion are important. The filament also features good resistance to chemicals and UV radiation.

     

    Important key features

    • Flexible with a shore hardness of 90A
    • Elongation up to 500%
    • Good resistance to chemicals and oils
    • Resistant to wear, tear, and abrasion
    • Thermal resistance up to 74°C

     

    Suitable applications

    • Manufacturing seals and gaskets
    • Protective bumpers and vibration dampers
    • Snap-fit applications
    • Various Orthopedic applications
    • 3D printing sleeves and hinges

     

    General printing guidelines *

    Nozzle size: ≥ 0.25mm Layer height: ≥ 0.1mm Print temp: ± 220 – 250° C *
    Heat bed: ± 0 – 60° C Fan speed: 50-100% Experience level: Intermediate

    *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

    Hygroscopy

    Python Flex is a very hygroscopic material and will attract and hold water molecules from the surrounding environment. When opened and exposed to humidity too long this can have a negative effect on the printing behaviour and quality of the filament. It is therefore strongly recommended to immediately remove the spool from the printer after printing and store it in a vacuum bag or airtight container without silica. When the filament is too wet it is recommended to dry Python Flex in an oven or filament drying machine at 65C for approximately 6 hours. Drying times can depend on how long the filament has been exposed to humidity. Python Flex is packaged in a vacuum bag with a guaranteed moisture content of less than 0,2% to ensure ideal printing behaviour and results directly after opening the spool.

    Product export information

    HS Code: 39169090 Description: Monofilament Country of origin: European Union

     

    Compliance *

    This filament is compliant to below listed directives and regulations.

    • RoHS directive 2011/65/EC
    • REACH directive 1907/2006/EC

    *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

    Products specifications
    Filament Material TPU
    Filament Diameter 1.75/2.85 mm
    Color
     
    Weight 500 g
    Nozzle size ≥ 0.3mm
    Print temp ± 220 - 250° C *
    Heat bed ± 0 - 60° C
    Layer height ≥ 0.1mm
    Print speed Medium-Fast
    Fan speed 50-100%
    Flow rate ± 110 - 130%
    Retraction Yes ± 5 mm
    Experience level Intermediate
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent
    *
    *
    *

    Python Flex TPU 90A is an easy to print flexible filament. With a shore hardness of 90A, this filament is much softer than our Python Flex TPU 98A. Python Flex TPU 90A shows good adhesion to the print bed and has perfect inter-layer adhesion.

    This industrial-grade TPU is designed for mechanical applications whereby resistance to wear, tear and abrasion are important. The filament also features good resistance to chemicals and UV radiation.

     

    Important key features

    • Flexible with a shore hardness of 90A
    • Elongation up to 500%
    • Good resistance to chemicals and oils
    • Resistant to wear, tear, and abrasion
    • Thermal resistance up to 74°C

     

    Suitable applications

    • Manufacturing seals and gaskets
    • Protective bumpers and vibration dampers
    • Snap-fit applications
    • Various Orthopedic applications
    • 3D printing sleeves and hinges

     

    General printing guidelines *

    Nozzle size: ≥ 0.25mm Layer height: ≥ 0.1mm Print temp: ± 220 – 250° C *
    Heat bed: ± 0 – 60° C Fan speed: 50-100% Experience level: Intermediate

    *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

    Hygroscopy

    Python Flex is a very hygroscopic material and will attract and hold water molecules from the surrounding environment. When opened and exposed to humidity too long this can have a negative effect on the printing behaviour and quality of the filament. It is therefore strongly recommended to immediately remove the spool from the printer after printing and store it in a vacuum bag or airtight container without silica. When the filament is too wet it is recommended to dry Python Flex in an oven or filament drying machine at 65C for approximately 6 hours. Drying times can depend on how long the filament has been exposed to humidity. Python Flex is packaged in a vacuum bag with a guaranteed moisture content of less than 0,2% to ensure ideal printing behaviour and results directly after opening the spool.

    Product export information

    HS Code: 39169090 Description: Monofilament Country of origin: European Union

     

    Compliance *

    This filament is compliant to below listed directives and regulations.

    • RoHS directive 2011/65/EC
    • REACH directive 1907/2006/EC

    *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

    Products specifications
    Filament Material TPU
    Filament Diameter 1.75/2.85 mm
    Color
     
    Weight 500 g
    Nozzle size ≥ 0.3mm
    Print temp ± 220 - 250° C *
    Heat bed ± 0 - 60° C
    Layer height ≥ 0.1mm
    Print speed Medium-Fast
    Fan speed 50-100%
    Flow rate ± 110 - 130%
    Retraction Yes ± 5 mm
    Experience level Intermediate