Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search
    Manufacturer: ColorFABB

    XT-CF20

    117,48 лв.
    Our first special filament based on the Amphora 3D polymer. Reinforced with 20% specially sourced carbon fibers, this filament is perfect for parts which need high stiffness. XT-CF20 has a beautiful matte surface finish when printed. CARBON FIBER IS ABRASIVE: A special point of attention is the abrasive nature of the carbon fibers. In general these fibers will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. Therefore we recommend to use hardened steel nozzles.
    *
    *
    Availability: Please select required attribute(s)

    colorFabb XT-CF20 is a copolyester based carbon fiber composite material that is based on the unique Amphora 3D polymer from Eastman Chemical and is loaded with no less than 20% specially sourced carbon fibers suitable for 3D Printing.
    Combining carbon fibers in filaments material is not a new idea, but colorFabb has been able to combine a lot of desired properties into 1 new material :

    • Extreme High Flex Modulus (6.2 GPa), twice as stiff as PLA/PHA
    • Moderate strain at break (8-10%), so no extreme brittle filament, but toughness
    • High Glass Temp. (Tg = 80C)
    • Very high Melt strength
    • Very high Melt Viscosity
    • Good dimensional accuracy and stability
    • Low odor / Styrene Free solution
    • Easy processing on many platforms
    • High attractive matt black surface

     

    CARBON FIBER IS ABRASIVE

    A special point of attention is the abrasive nature of the carbon fibers. In general these fibers will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. There colorFabb recommends to use nozzle’s from Stainless steel or hardened copper alloys.

    APPLICATIONS :

    Just think of all the great applications for a variety industries, that now will have a material that performs according to expectations. Functionality, stiffness, dimensional stability, heat resistant, what more can you ask? Applications in the RC Industry / Drones / Aerospace / Automotive / Prototyping and many more can now be developed on your desktop 3D Printer.

    AMPHORA 3D POLYMER

    ColorFabb XT-CF20 is produced wih AMPHORA 3D Polymer from Eastman Chemical.

    Amphora

    Amphora 3D Polymers is a specially developed co-polyester just for 3D Printing. It’s toughness and high meltstrength makes it the perfect material for producing fiber reinforced composites, providing the necessary viscosity for 3D printing, combined with a high toughness in the filament and end application



    Products specifications
    Filament Material CO-Polyester
    Filament Diameter 1.75/2.85 mm
    Color
     
    Weight 750 g
    Nozzle size ≥ 0.15mm
    Print temp ± 240 - 260° C *
    Heat bed ± 60 - 70° C
    Layer height ≥ 0.1mm
    Print speed 40 - 70 mm/s
    Fan speed 50-100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent
    *
    *
    *

    colorFabb XT-CF20 is a copolyester based carbon fiber composite material that is based on the unique Amphora 3D polymer from Eastman Chemical and is loaded with no less than 20% specially sourced carbon fibers suitable for 3D Printing.
    Combining carbon fibers in filaments material is not a new idea, but colorFabb has been able to combine a lot of desired properties into 1 new material :

    • Extreme High Flex Modulus (6.2 GPa), twice as stiff as PLA/PHA
    • Moderate strain at break (8-10%), so no extreme brittle filament, but toughness
    • High Glass Temp. (Tg = 80C)
    • Very high Melt strength
    • Very high Melt Viscosity
    • Good dimensional accuracy and stability
    • Low odor / Styrene Free solution
    • Easy processing on many platforms
    • High attractive matt black surface

     

    CARBON FIBER IS ABRASIVE

    A special point of attention is the abrasive nature of the carbon fibers. In general these fibers will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. There colorFabb recommends to use nozzle’s from Stainless steel or hardened copper alloys.

    APPLICATIONS :

    Just think of all the great applications for a variety industries, that now will have a material that performs according to expectations. Functionality, stiffness, dimensional stability, heat resistant, what more can you ask? Applications in the RC Industry / Drones / Aerospace / Automotive / Prototyping and many more can now be developed on your desktop 3D Printer.

    AMPHORA 3D POLYMER

    ColorFabb XT-CF20 is produced wih AMPHORA 3D Polymer from Eastman Chemical.

    Amphora

    Amphora 3D Polymers is a specially developed co-polyester just for 3D Printing. It’s toughness and high meltstrength makes it the perfect material for producing fiber reinforced composites, providing the necessary viscosity for 3D printing, combined with a high toughness in the filament and end application



    Products specifications
    Filament Material CO-Polyester
    Filament Diameter 1.75/2.85 mm
    Color
     
    Weight 750 g
    Nozzle size ≥ 0.15mm
    Print temp ± 240 - 260° C *
    Heat bed ± 60 - 70° C
    Layer height ≥ 0.1mm
    Print speed 40 - 70 mm/s
    Fan speed 50-100%
    Flow rate ± 100%
    Retraction Yes ± 5 mm
    Experience level Beginner