COLORFABB_XT is unlike PLA absolutely neutral from color and completely transparent. So if your 3d print project requires some transparency then should give COLORFABB_XT a try, it is as transparent as any filament can get. Apart from its transparency COLORFABB_XT is also a super tough material. Just try and break the filament and you’ll know that this will make super strong parts which are temperature resistant to 70C!
At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using colorFabb 3d printing filament.
Adviced 3d printing temperature:
240-260C
Adviced 3d print speed:
40 - 70 mm/s
Advised Heated bed
60-70C
Build platform
For colorFabb_XT we advice to print on a heated bed. After printing, the build plate needs to cool down to about 20-30 C at which point you can remove the printed part.
Since colorFabb develops and produces their own filaments we have a lot of knowhow about our materials. Here you’ll find all kinds of interesting material specifications that will help you decide which material is best for your project.
Material:
colorFabb_XT CO-POLYESTER
Diameter Tolerance:
± 0.05 mm
Density:
1.27 g/cm3
Glass Transition Temperature:
75C
